Shutting Down - Panasonic FZ-M1 SERIES Operating Instructions Manual

Troubleshooting (Basic)
n Entering Password
Even after enter-
ing the password,
password input
screen is displayed
again.
n Shutting down
Windows does not
shut down.
n Display
No display.
The screen is dark. l The screen is darker when the AC adaptor is not con-
The screen is disor-
dered.
34
<Only if the external keyboard is connected>
l The computer may be in ten-key mode.
If the NumLk indicator
the ten-key mode, and then input.
l The computer may be in Caps Lock mode.
If the Caps Lock indicator
disable the Caps Lock mode, and then input.
l Remove the USB device.
l Wait one or two minutes. It is not a malfunction.
l The display is turned off by the power-saving function.
Touch the screen.
l The computer entered sleep or hibernation by the power-
saving function. To resume, press the power switch.
l When using an external display,
Ÿ Check the cable connection.
Ÿ Turn on the display.
Ÿ Check the settings of external display.
nected. Open the Dashboard for Panasonic PC and adjust
the brightness. As you increase the brightness, battery con-
sumption increases.
You can separately set the brightness for when the AC
adaptor is connected and when not connected.
l Turn off the concealed mode (è
- Reference Manual "Setup Utility").
l Changing the number of display colors and resolution may
affect the screen. Restart the computer.
l Connecting/disconnecting an external display may affect
the screen. Restart the computer. Under factory default set-
tings, the brightness of the display screen will adjust auto-
matically based on the ambient light detected by the ambi-
ent light sensor. You can adjust the settings for this sensor
(è page 17).
NumLk to disable
lights, press
Caps Lock to
lights, press
Operating Instructions