Advertisement
Quick Links
TALK&TALK TK2 Bluetooth Headset User Manual V4
Turning your TK2 ON & OFF-----------------------------------------------------------------
ON
Press and hold the MFB
Button for
3
seconds, and the Blue LED will light 1 second. The TK2 will
automatically connect to the previously paired Bluetooth enabled phone. If the connecting is fail, the Blue
LED will flash twice per 5 seconds.
The TK2 will enter Idle mode.
And it will automatically turn off if TK2 don't connect to any Bluetooth
device in 4 minutes.
Advertisement
Summary of Contents for TALK&TALK TK2
- Page 1 Bluetooth enabled phone. If the connecting is fail, the Blue LED will flash twice per 5 seconds. The TK2 will enter Idle mode. And it will automatically turn off if TK2 don’t connect to any Bluetooth device in 4 minutes.
- Page 2 Press and realse the MFB button in 1 second. The TK2 will try connect to the previously paired Bluetooth enabled phone. If the connecting is fail, the Blue LED will flash twice per 5 seconds.The TK2 will enter Idle mode.
- Page 3 Plug the big connector of Micro-USB cable into your USB port of your pc or others. Then plug the small connector of Micro-USB cable into your TK2 charging socket. When you plug the USB cable for charging ,the TK2 will be Reset. But you can power-on it again in charging state.
- Page 4 2.4.2 Bluetooth RF Char. Test condition 항목 Test Hopping Packet Payload No. of unit mode type Packet Average power PRBS9 ∆f1 Modulation ∆f2 BS55 ∆f1 BS0F avg/ ∆f2 ICFT PRBS9 Carrier frequency drift BS55 Single sensitivity slot Loop PRBS9 back Multi Loop PRBS9...
- Page 5 Button functionality Funtionalities Status Action Pairing Power Off Ultra Long Press MFB Pick Up Receive a ingcoming Call Short Click MFB Hang Up In-Call Mode Short Click MFB Reject Call Receive a incoming Call Long Press MFB Last Number Redial Standby Mode Double Click MFB Transfer Audio...
- Page 6 LED flash pattern . TK2 STATES LED status. 1. Power-On. Blue LED flash 1 second 2. Idle(no link phone) Blue LED flash 2 times per 5 second 3.Pairing mode Blue&Red LED alternantly flash 1 time per 1 second 4. connected mode Blue LED flash 1 time per 5 second 5.
- Page 7 Warning: Changes or modifications made to this device not expressly approved by HongKong AtoB Co. Ltd. may void the FCC authorization to operate this device.
Need help?
Do you have a question about the TK2 and is the answer not in the manual?
Questions and answers