Please make sure that the user of this ViGOR tool carefully reads these operating instructions and fully understands all information given before it is used. • For effective use of the ViGOR Clutch Alignment Tool as intended, it is essential that all safety and other infor mation in these operating instructions is adhered to.
Always ensure that tools are used, inspected and maintained in com pliance with the respec- tive local, state, national or federal regu lations • The ViGOR Clutch Alignment Tool must only be used if it is in good working order. • Any deviation from the intended use and/or any misapplication of the ViGOR Clutch Alignment Tool is not allowed and will be considered as improper use.
3 Design and Function 3.1. Technical Data / Included in Delivery 3.2 Optional Accessories Pressure piece (3-hole pitch) Pressure spindle V2308 Expansion set for SAC Clutch Operation lever Alignment Tool Set, consisting of: Resetting tool Pressure plate (4-hole pitch) Fixing nut Fixing nut Centring pin 15x23...
Page 6
3 Design and Function 3.3. Process and Functional Description When working please make sure to observe the instructions of the car manufacturer! This operation instruction is provided as a guide only. Always make sure that you have a copy of the appropriate vehicle manufacturer‘s service instructions, or another appropriate manual that provides the correct information needed to correctly execute the work.
• Storage temperature: -10° up to +45°C • Relative air humidity: max. 60% 6 Disposal • For disposal, clean ViGOR Clutch Alignment Tool and disassemble it according to the regula- tions for work safety and environmental protection. Components can be recycled.