Symbol Subwoofer; Introduction; Positioning; Connections - Avalon Acoustics Symbol AVALON SYMBOL Subwoofer And Center Channel Owner's Manual

2 Symbol Subwoofer

Introduction

Your Avalon MultiChannel Systems loudspeakers were shipped in heavily padded
cardboard containers to ensure their safe arrival. It is recommended to save these
containers for possible future use.
At least two people are required to lift the Subwoofer from the shipping container. The
carton may also be placed on its side and the Subwoofer slid out on its back so as not to
put pressure on the grille assembly.

Positioning

The Symbol Subwoofer was designed to be placed beneath a projection screen (with
Center Channel attached). The cabinet may however be placed at the center rear or
sides of the room, depending on room limitations.
Subwoofer in the corners of a room unless the surround sound processor has
sophisticated filter topologies capable of compensating for the inherent room loading
problems associated with corner placement.

Connections

AC INPUT: The input voltage has been factory preset for the Country of destination.
Connect a standard IEC power cord (not supplied for International use due to varying
plug configurations).
advisable that an AC connection commensurate with a high-powered amplifier be
used.
Current transfer is essential for tight control of the drivers; it is
4
It is inadvisable to place the