Using The Wps Button; Wps Pin Connection - Huawei U9500 User Manual

4. Select the desired Wi-Fi network. If you select a secured
network, enter the password when prompted.
• If Wi-Fi and mobile network are both enabled, your phone
connects to the Wi-Fi network preferentially and switches to the
mobile network when Wi-Fi is unavailable.
• To add a new Wi-Fi hotspot Service Set Identifier (SSID), on the
Wi-Fi
settings screen touch
• Obstacles such as walls may block Wi-Fi signals and reduce the
signal strength.
Connecting to Wi-Fi Using WPS
Wi-Fi Protected Setup (WPS) is also called fast safe setup. It
simplifies the setup of Wi-Fi connection. Instead of complex
settings on the Wi-Fi hotspot management software, the WPS
function allows you to set up a safe Wi-Fi connection by
pressing the WPS button or entering the PIN.
44
ADD NETWORK
.
Before connecting your device to a Wi-Fi hotspot, ensure that
the Wi-Fi hotspot supports the WPS function.

Using the WPS Button

1. Enable Wi-Fi, and then go to the
network list, touch the hotspot you want to connect to.
2. In the displayed dialog box, select the
check box. Touch
from the displayed options menu.
3. Touch the Wi-Fi access point button. A message will be
displayed when your phone connects to the network.

WPS PIN Connection

1. Enable Wi-Fi, and then go to the
network list, touch the hotspot you want to connect to.
screen. In Wi-Fi
in , and then choose
screen. In the Wi-Fi