Introduction Dear customer, Please read this manual carefully before using the stringing machine. Pack list The Stringing Machine P-103 consists of 3 cartons. Its inner parts all have a protective layer to defend against bumping or falling The Stringing Machine Pro’s Pro P-103 detailed pack list: Preface number Parts name Quantity...
Parts and Functions I. Components 1. Structure illustration P-501: Copyright 2010 Powertennis Nederland 3...
Page 4
The Stringing Machine Hose The Clip Racket Body SIBOASI The X Type Feet Main machine Host Head The Stinging-device The Stinging Button The Return-place Button The Power Indicator Light The Rise- The Emergency Return-PLACE Button pound Button The Clip Racket Body Pedestal The Fall-pound Button LED Display Device SIBOASI...
Page 5
Clip Racket Body Clip string Tennis clip Badminton racket device clip racket Clip racket device backbone hole device backbone hole II.Function • High-level vertical Stringing Machine. • Specially designed string head. • Suitable for any type of racket including Tennis, Squash, Badminton, Widebody, Extra Long Rackets).
• The cool off fan enables the machine to work longer and more stable. • High-grade stainless steel swivel clamps, which hold the string tight, no slipping or damaging the string and easy to adjust. Operating instructions I. Unpacking and assembly 1.
Page 7
will go out. Press the “Return-place” Button again, the Stringing-device will turn anticlockwise in a full circle. (If there is a string inside, the string gripper will stop turning automatically when the tension is reached) 5. In Standby mode, the required pounds can be set. To increase the pounds press the rise-pound button (LED display).
Badminton clip racket device backbone hole Clip racket device Extend -shrink arm Clip racket device backbone Tennis clip racket device backbone hole Note – all parts of the stringing machine are adjusted and have been tested. The machine is calibrated. After assembly you can start stringing.
Page 9
2. Every six months inject a little amount of lubricant on the stringing hook’s adjustment knob, the clip racket arm’s adjustment knob, the clip racket body to turn part and the stringing-device’s steel ball part. 3. Don’t allow water, oil and the other acidic material and alkaline material to enter the inside of the machine.
Page 10
• The stringing-device’s screw is loose, please lock tightly. • The contact-part of the stringing device and string has oil stains, please use alcohol and clean with a soft cloth. 4. When stringing, the pounds on the LED are not accurate: •...
Need help?
Do you have a question about the P501 and is the answer not in the manual?
Questions and answers