Jarv JRV-SBD1000 User Manual page 9

6) Stride Length Setting: In the state of time display
(if using the Imperial system), press the MODE button
twice, then press the SET button for 2 seconds to enter
the stride length interface, press the MODE button to
adjust stride length, the range is from 10 to 80 inches,
the stride length will increase by 2 inches increments
when pressing the MODE button, default range starts at
24 inches. If using the Metric system, the range is 30 to
200 cm, default range starts at 60cm, and the stride
length will increase by 5cm increments when pressing the
MODE button. Once stride length has been adjusted
correctly, Press the SET button to confirm and exit.
7) Weight Setting: In the state of time display (if using
the Imperial system), press the MODE button 3 times,
then press the SET button for 2 seconds to enter the
weight setting interface, press the MODE button to
adjust weight, the range is 70 to 250lbs, the weight will
increase by 5lbs increments when pressing the MODE
button, default range starts at 130lbs. If using the Metric
system, the range is 30 to 120kg, default range starts at
9