Roland Service Center, or an Do not place in an unstable location below. authorized Roland distributor, as listed on the Otherwise, you risk injury as the “Information” when: Rear result of the unit toppling over or •...
• Never use benzine, thinners, alcohol or unit; or move it farther away from the source • Roland is a registered trademark or solvents of any kind, to avoid the possibility of of interference.
Name of Parts 21 22 To AC Outlet 45-rpm adaptor Pitch indicator Green LED: The [PITCH ADJ.] slider is in center click position Turntable platter and the speed is quartz-controlled. Slipmat The speed was changed with the [PITCH ADJ.] Red LED: slider.
Getting Ready Assembly Contents of the Package Check following parts included in the package with the main unit: Remove the main unit with the packing from the box and take off the packing. Turntable platter Set the 45-rpm adaptor on the main unit. Slipmat Insert the turntable platter onto the center spindle.
* This document explains the specifications of the product at the time that the document was issued. For the latest information, Changing the Pitch refer to the Roland website. As long as the [PITCH ADJ.] slider is in center click position, the turntable is operated witch quartz-controlled rated speed. The pitch indicator will then be lit in green.
For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the TT-99 and is the answer not in the manual?
Questions and answers