Advertisement
The Stella Techno Kids Chair by Okamura can be adjusted to dimensions compatible with JIS sizes 2
to 6 for school furniture at a desk height of approximately 76cm.
The seated height can be adjusted to any setting, the footstep height supports sizes 2 to 4, and the
depth can be adjusted to 5 levels to match the child's growth for enabling usage with correct posture.
*Refer to the figure below, and set the size to match the child's height.
Height 120cm
JIS Size 2
approx 29cm
Desk
*An approximate indicator is displayed on the seat slide and footstep.
*For the seated height, adjust the height by referring to the figure above. (A desk height of 76cm is standard.)
Adjustment Procedure
Adjust the height of the seat
Check!
Pull up the seat height
adjustment lever to adjust the
height of the seat.
Seat height
adjustment lever
Adjust the seat position
Check!
The seat can be moved by pulling the seat forward/backward slide lever.
Set to a position that matches the child based on the provided indicator.
Seat forward/backward
slide lever
Height and Setting Method
Height 135cm
JIS Size 3
approx 33cm
Desk
(Adjustment should always be performed by an adult to ensure the correct sitting posture.)
If you sit on the seat while
pulling the lever, the seat is
lowered. If you pull the lever
without sitting on the seat, the
seat is raised.
Indicator
Height 150cm
JIS Size 4
approx 36cm
Desk
Using the locking casters
Check!
When a person sits on the seat, the casters sink
down and lock in place.
Unlocked state
*A weight of at least 26 kg, including the chair, is
required for the adjustable casters to sink down.
Sink down
Locking and unlocking swivel operation
Check!
The seat turns while the swivel lock lever is raised.
When the lever is lowered, the seat is locked.
Height 165 to 180cm
JIS Size 5 to 6
approx 38 to 40cm
Desk
Remove
footstep
Unlocked
Swivel lock lever
Advertisement
