Make a note of this data 5. Before use in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service 6. Operation department. 7. Care and maintenance 8.
4.2 Correct use The appliance is to be used to charge Hilti batteries with a nominal voltage of 7 to 18 volts. It can be used to charge the following batteries: SFB105...
(Hilti service department). G To avoid risk of accident, use only original Hilti spare 2. Insert the supply cord plug in the mains socket. The green lamp should light continuously.
Indicators acceptable level after a long period of use, we recom- Green lamp mend that the battery is returned to Hilti for a diagnos- Lit continuously The charger is connected to the mains tic check. supply and ready for operation.
Charging does not begin. 9. Disposal Most of the materials from which Hilti appliances are manufactured can be recycled. The materials must be cor- rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old appliances for recycling.
10. Warranty Hilti warrants that the tool supplied is free of defects in material and workmanship. This warranty is valid so long as the tool is operated and handled correctly, cleaned and serviced properly and in accordance with the Hilti...
Need help?
Do you have a question about the SFC 7/18H and is the answer not in the manual?
Questions and answers