Important Precautions WARNING: To reduce the risk of serious injury, read these warnings before using the scooter. 1. Read, understand, and follow all warnings and 8. The scooter is not recommended for riders instructions on the scooter and in this manual. weighing more than 225 pounds.
Before You Begin Thank you for selecting the new E-METRO ® motorized scooter. The E-METRO scooter combines quiet electric power with a sturdy, compact design to provide you with hours of enjoyment. And when you’re not using the E- METRO scooter, it can be folded for easy storage or transport. For your safety and benefit, carefully read all of the warnings and instructions in this manual before using the E-METRO scooter.
How to Set Up and Fold the Scooter SETUP The scooter is shipped in the compact storage position. If the quick release cannot be closed, turn the adjust- Follow the steps below to set up the scooter for use. ment nut counterclockwise one quarter turn while keeping the lever from turning.
How to Operate the Scooter CHARGING THE BATTERIES THE ON/OFF SWITCH The scooter’s sealed lead-acid batteries should be The on/off switch on the right side of the scooter is the charged and stored at temperatures between 50°F and main power switch (see the drawing at the left). Turning 100°F (10°C and 38°C).
To order replacement parts, call toll-free 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please mention the model number of the scooter (MTSC20000) and the number and description of the needed parts.
Page 8
Maintenance and Troubleshooting Regularly check the scooter and make sure all parts are If the hand brake requires further adjustment, the properly tightened. If the scooter does not function prop- lower end of the brake cable can be adjusted. erly, follow the steps below. IMPORTANT: Move the Remove the six M8 x 17mm bolts from the deck, lift on/off switch to the off position and remove the key off the deck, and locate the adjustment barrel and...
Need help?
Do you have a question about the MTSC20000 and is the answer not in the manual?
Questions and answers