Acer LEAP WARE User Manual page 31

I can't control my camera
The Snapshot function might not work on some Android phones.
Please check your camera app; Snapshot will only work if pressing
the volume up or volume down button takes a photo. If the volume
buttons do not work, check the camera app settings to see if you can
change the volume button function.
If you can take photos with your phone's camera using the volume
key, but the Snapshot function does not work, please follow these
steps to activate Snapshot:
1. Pair the Leap Ware with Liquid life.
2. Open Settings on your phone.
3. Open Bluetooth settings.
4. In the Available device list, find the Leap Ware name in the list
("Leap Wear-xxxx" where xxxx = number).
5. For Android devices: Tap the settings button next to the Leap Ware
name. Uncheck the Input device option and then check it again.Tap
OK then the Leap Ware name and make sure it is Paired.
6. The Snapshot function should now work.
My Leap Ware has turned off
Your Leap Ware will automatically turn off if the battery level drops to
about 1%, try charging it for at least 15 minutes before using it again.
Your Leap Ware will also turn off if the battery overheats. If your Leap
Ware is unusually warm, allow it to cool before charging it. If the Leap
Ware repeatedly overheats, please contact an authorized Acer
service center.
How do I wake my Leap Ware up?
If you are having trouble waking your Leap Ware up, try charging it.
If it has been fully charged or still has power, tap the screen or press
the Home key.
My Leap Ware won't turn on
Try charging your Leap Ware. It should turn on after a few minutes of
charging.
If this doesn't help, please contact an authorized Acer service center.
Troubleshooting - 31