Display During Battery Operation - SFE SIATA Manual

4.2.2 Display during regeneration
When the module is in regeneration, the display shows the following information:
• During the transition phases nC-|, where n is the number of the regeneration cycle phase, a turning bar
is display to mean that a transition is occurring from a regeneration phase to the next one.
• During the stopping phases nCxx|, where n is the number of the regeneration cycle phase and xx are
the residual minutes before switching to the next phase.
• Regeneration in progress icon, steady on.

4.2.3 Display during battery operation

When the module is battery supplied, the display shows the following information:
• Time: xx:xx with flashing ":".
• Weekday, if the day of the week is flashing it means that the regeneration is enabled for that day.
• Service icon
• Residual volume and time are displayed alternately, if volume regeneration is enabled.
• The battery icon is displayed
Transition to phase 1
Phase in progress and time remaining before passing to the next step
8