Download Print this page

Philips HP4669 Owner's Manual page 10

Philips salonstraight pro owner's manual
Hide thumbs Also See for HP4669:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
EnglisH
10
-
For coarse, curly or hard-to-straighten hair, select a medium to high
setting (170 and up).
-
For fine, medium-textured or softly waved hair, select a medium to
low setting (160 and down).
Take extra care with pale, blonde, bleached or colour-treated hair, since
it is susceptible to damage at high temperatures.

Press the + button to increase the temperature setting or press
the - button to decrease the temperature setting (Fig. 3).
The display shows the selected temperature setting.
,
When the appliance has heated up to the selected setting, the word
,
'READY' appears on the display.
The bars on the display show the remaining usage time of the
,
appliance. The total usage time is 60 minutes. Every ten minutes one
of the six bars disappears.
5
Comb or brush your hair so that it is disentangled and
smooth. (Fig. 4)
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Tip:it is better to section off the crown area and to straighten the hair
underneath first, followed by the top area.
6
Take a section that is not wider than 5cm. Place it between the
straightening plates and press the handles of the appliance firmly
together.
7
Slide the straightener down the length of the hair in 5 seconds,
from root to hair end, without stopping to prevent
overheating (Fig. 5).

Repeat this process after 0 seconds until you have achieved the
desired look.

Let your hair cool down. Do not comb or brush it before it has
cooled down, as this would ruin the hairstyle you have just created.

Advertisement

loading

This manual is also suitable for:

Salonstraight pro hp4669/00Salonstraight proHp4669/00