Related Manuals for PACIFIC CYCLES 2Rider
Summary of Contents for PACIFIC CYCLES 2Rider
- Page 1 2Rider Assembly manual 2Rider Assembly manual Canopy Handlebar Brake Seats Kid seats Grip shifter Safety bar Bumper Rear Luggage tray Suspension Pedal deraileur Front wheel Rear wheel (Picture shown with optional canopy and kid seats)
- Page 2 2Rider Assembly manual 2Rider features • 4 seats for 2 riders and 2 passengers. • 8 speed gears for effortless rides. • Full suspension for max comfort and safety. • Large luggage tray for drinks and luggage. • Roof canopy to keep off sun rays.
-
Page 3: Specification
2Rider Assembly manual Specification • Chassis Aluminum 7005T6, powder coated. • Suspension All wheels independently suspended. • Geometry Ackermann geometry, center point steering. • Wheels 20”(406) hi-pressure tires, alloy rims and hubs. • Gears Shimano 8 speed gears, 28~82” gear ratio. - Page 4 2Rider Assembly manual Step 1: Take out all parts in the box and raise the chassis about 40 cm height for ease of assembly work. (1) Canopy (2) Luggage tray (3) 2 kid seats (4) Bow assembly (5) Kid seats stay...
- Page 5 2Rider Assembly manual Step 2: Insert the handlebar stem to the steerer, tighten the clamp and the setting screw.
- Page 6 2Rider Assembly manual Step 3: Connect the left steering link rod.
- Page 7 2Rider Assembly manual Step 4: Assemble the pedals to crank arms at both sides.* This step will not affect any other sub-assembly, you can decide do it now or later. *Note: Always screw the “R” pedals on the chainwheel side clockwise and the “L” pedals on the crank side counterclockwise.
- Page 8 2Rider Assembly manual Step 5: Assemble the bow and front bumper to the chassis.
- Page 9 2Rider Assembly manual Step 6: Assemble the front wheels to the front axle and hook the front V brake cable. *Tools needed:10mm Allen key wrench, 19mm open wrench. ...
- Page 10 2Rider Assembly manual Step 7: Assemble the rear wheels to the rear dropouts and hook the rear V brake cable.
- Page 11 2Rider Assembly manual Step 8: Assemble the luggage tray.
- Page 12 2Rider Assembly manual Step 9: Assemble the seats, and insert the grip shifter on the right seat handlebar.
- Page 13 2Rider Assembly manual Step 10: Assemble the kit seat to the kit seat stays, and assemble the kit seat subassembly to the main chassis. Insert the safety bar.
- Page 14 2Rider Assembly manual Step 11: Assemble the canopy.
- Page 15 2Rider Assembly manual Step 12: Align the handlebar and front wheels, adjust the derailleurs and brakes, and check all bolts and nuts are tight. Note: If you remove the canopy, 2Rider can stand up to save storage space.