Table of Contents
Advertisement
Quick Links
ABOUT THE RACK-305G
The 4U, heavy-duty steel RACK-305G AT/ATX compatible
rackmount industrial chassis is designed to operate reliably in
industrial environments where it will be exposed to dust, wide
temperature variations, and shocks and vibrations, among other
things.
SPECIFICATIONS
Form Factor: Standard 4U, 19" wide
SBC Form Factor: Full-size, slot CPU cards
Construction: Heavy-duty steel
Slots Number: 14-slot (305G), 7-slot (305GATX)
Cooling: 2 x 8cm fan
Drive Bay Combinations:
o
3 x 5.25" Optical drives + 1 x 3.5" FDD (floppy disk
drive)
o
2 x 5.25" Optical drives + 1 x 3.5"HDD (hard disk
drive) + 1 x 3.5" FDD
o
2 x 5.25" Optical drives+ 2 x 3.5" FDD
Dimensions (DxWxH):
o
413mm x 431mm x 176mm
Operating Temperature: 0~40°C
Relative Humidity: 5~95%
Vibration:
o
5-17Hz, 0.1" double amplitude displacement
o
17-640Hz, 1.5G acceleration peak to peak
Shock: 10G acceleration peak to peak
RACK-305G QIG
RACK-305G
4U Rackmount Chassis
Version: 1.0
Quick Installation Guide
PACKING LIST
When you unpack the chassis, make sure the following items have
been shipped.
DETAILS OF INCLUDED SCREWS
The attached screw set includes five types of screws. Screws used
for chassis installation are shown below.
5.25" Optical Drives
3.5" FDD
3.5" HDD
2.5" HDD
Power Supply Unit
Rackmount Bracket
Backplane
Table 1: Screws for Peripheral/Parts
IEI Technology Corp.
1 x Quick Installation Guide
1 x Power cord
2 x Handles and handle plates
1 x Screw set
2 x Keys
1
2
3
Screw Label (refer to the picture
Peripherals/Parts
above)
4
5
5
5
1
4
1
3
3
2
Page 1
Advertisement
Table of Contents
Summary of Contents for IEI Technology RACK-305G
-
Page 1: Packing List
1 x Screw set ABOUT THE RACK-305G 2 x Keys The 4U, heavy-duty steel RACK-305G AT/ATX compatible DETAILS OF INCLUDED SCREWS rackmount industrial chassis is designed to operate reliably in The attached screw set includes five types of screws. Screws used industrial environments where it will be exposed to dust, wide for chassis installation are shown below. -
Page 2: Dimension Drawing
DIMENSION DRAWING The dimensions of RACK-305G are shown below. Figure 1: Dimension Drawing (measurement units: millimeter) RACK-305G QIG IEI Technology Corp. Page 2... -
Page 3: Installation Steps
Step 2: Lift the top cover up gently. STEP 1: UNPACK The RACK-305G is shipped in a plastic bag that is placed inside a cardboard box. The accessories are also shipped with the chassis. When you unpack the chassis you must: Make sure all the accessories and components listed above are present. -
Page 4: Step 5: Backplane Installation
STEP 5: BACKPLANE INSTALLATION chassis with six retention screws. To install the PSU, please follow the steps below. The IEI backplanes listed below are compatible with the RACK-305G chassis. Step 1: Correctly position the PSU at the rear of the chassis making sure that the power switch and the cable Model No. -
Page 5: Step 6: Cpu Card Installation
Remove the slot cover at the back of the chassis. To do this, remove the slot cover retention screw at the top of The RACK-305G chassis has two drive brackets: one main drive bracket and a side bracket. The main drive bracket supports up to the slot cover. - Page 6 3.5” drive tray out of the of the drive bracket and into the HDD. main drive bracket. Figure 15: Install a 3.5” Disk Drive into the Adapter Bracket Figure 13: Remove the Front Metal Cover Retention Screws RACK-305G QIG IEI Technology Corp. Page 6...
-
Page 7: Step 9: Front Panel Cables
If you want to install a 3.5” FDD drive into the main drive bracket, STEP 9: FRONT PANEL CABLES follow the steps below: The RACK-305G has the following compotents accessible at the Step 1: Remove the 3.5” drive tray from the top drive bay in the front. -
Page 8: Chassis Maintenance
Step 6: Reinstall the bracket back in the chassis and secure it to the chassis with the previously removed retention There are two 8 cm cooling fans inside the RACK-305G chassis. To screws. replace a fan, please follow the instructions below.