Advertisement
www.electrolux.com
6
4. CONTROLS
Button Function
A
B
C
D
E
F
G
H
Warning: In order to activate the function press on the symbol
Turns the lighting system on and off at maximum intensity.
Press and hold for approximately 2 seconds to turn
the lighting system on and off in Courtesy Light mode.
Turns the motor on at the speed one or turns the motor off.
Press and hold for approximately 5 seconds to Lock
/ Unlock the Keyboard, for example in order to clean
the surface.
Turns the Motor on at Speed one.
Turns the Motor on at Speed two.
Turns the Motor on at Speed three.
Turns the Motor on at Maximum Speed. This speed is
timed to run for 6 minutes. At the end of this time the
system will automatically return to the speed set before.
Suitable to deal with maximum levels of cooking fumes.
Delay function
Activates/Deactivates automatic switch-off with a 15
minutes delay. Suitable to complete elimination of residual
odours. Can be activated from any position. It cannot be
activated if the Intensive function is in use.
Press and hold the button for approximately 5 seconds,
with all the loads turned off (Motor and Lights), to turn
the Remote control on/off.
When the filters alarm is triggered, the alarm can be
reset by pressing this button.
These indications are only visible when the motor is
turned off.
Press and hold the button for approximately 5 seconds,
with all the loads turned off (Motor and Lights), to turn
the Activated Charcoal Filter alarm on/off.
Led
On/Off
On/Off
On/Off
All the Leds Flash - Keyboard Locked.
All the Leds Flash - Keyboard Unlocked.
While it is Locked the Leds light up one at a
time in cycle.
On/Off
On/Off
On/Off
On/Off
On/Off
Buttons B LED + C LED (Flashes twice) - Remote
control Activated.
Buttons B LED + C LED (Flashes once) - Remote
control Deactivated.
The Button LED flashes three times.
When the procedure terminates, the indication
shown previously turns off:
Button H lights up, indicating the need to wash the
metal grease filters. The alarm is triggered after the
Hood has been in operation for 100 working hours.
Button H flashes, indicating the need to change
the activated charcoal filters, and also to wash the
metal grease filters. The alarm is triggered after the
Hood has been in operation for 200 working hours.
All the Leds (Flash twice)-Alarm Activated.
All the Leds ((Flash once)-Alarm Deactivated.
Advertisement
