Stroller Assembly Instructions IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE USE. YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS. For model(s) WG101, WG102 Service Phone: 02 4728 8090...
Page 2
WARNING • This stroller is to be used for one child only. • It is suitable for children from birth to approximately 36 months old (up to a weight of no more than 17kg). • Do not leave the harness buckled when not fi tted to a child in the stroller because the harness can form loops which could be a strangulation hazard.
Page 3
WARNING TO AVOID INJURY OR DEATH: • ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY. • DO NOT LEAVE CHILDREN UNATTENDED. • SECURE THE CHILD IN THE HARNESS AT ALL TIMES. • DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
Mosquito Net x 1* Optional Accessory Please check all parts are included in the carton; if there are any missing parts, please contact the InfaSecure Service Department on 02 4728 8090. * supplied with some models 3 | Carton Contents...
Assembly Frame Open the front legs in the direction of the arrow . The frame is fully opened when you hear a “click”. Lift up the handle as indicated Wheels Assembly | 4...
Step 1. Assemble the front wheels then fi x the wheel axles into leg housings as shown in . It is fi xed when you hear a “click”. Step 2. Assemble rear wheels and fi x the rear wheel axles into the rear wheel housings as shown in , it is fi xed when you hear a “click”.
Hood Hood Assembly Step 1. Connect the two zipper sections together. Step 2. Pull zip to fi x hood onto seat unit. Step 3. Insert hood frame into the opening of the hood and pull through , ensuring the small bend on the frame near the attachment point is angled away from the seat unit.
Hood Disassembly Step 1. Push on the plastic at point in the direction of the arrow to unclip and detacth from slot Step 2. Pull on the hood connector and it will easily slide free. Step 3. Unlatch the elastic band from the connector , and detatch the metal bar ;...
Usage Seat-To-Sleeping Cot Conversion (method 1) Press the adjust button , then adjust the seat into the horizontal position . Unlock the belt buckles & .The seat is now in the bassinet mode Seat-To-Sleeping Cot Conversion (method 2) Press the button on Cot Adjustment Dial to release , then adjust the seat into the horizontal position...
DO NOT USE THIS BASSINET ONCE THE CHILD CAN SIT UP UNAIDED. Maximum weight of child; 9kgs. For use with models: WG101 & WG102. DO NOT USE THIS SEAT WITH ANY OTHER MODELS OF PRAMS/ STROLLER. Maximum weight of child; 17kgs. For use with models: WG101 &...
Harness Attaching the Buckles Attach the buckles onto the shoulder straps , then onto the buckles of the waist straps ( ) then attach these to the central buckle until you hear a “click” Releasing the Buckles Press down on the central button to release the straps. Adjusting the Harness Adjust the shoulder and waist straps for a fi rm and comfortable fi t by using the adjuster...
Wheel Function Front Wheel Lock Pull the front wheel locking lever upward until you hear a “click”. Front Wheel Removal Press down the front wheel quick-release button and the wheel will release Rear Wheels Removal Press the quick release button , then pull out the wheels.
Brakes Apply the Rear Wheel Brake Pull up on the red brake lever to apply the brakes. Release the Rear Wheel Brake Press down the second lock to release the brakes. Handle Bar Function Reversing The Handle Pull up on the two reversing levers while pushing the handle bar to the opposite side.
Seat Reclining Adjustment Press the recline adjustment button and push down or pull up on the seat to adjust to the desired position Ensure that the seat has locked into position correctly before putting your child into the seat. Reversible Seat Simultaneously press the safety release buttons on either sides...
Folding The Stroller Folding The Handle Press the height adjustment button on the handle to lower the handle to lowest position , then pull up on both the handle reversing adjusters to fold down the handle Removing The Seat Simultaneously press the safety release button on both sides of seat unit and lift up the seat Fold the Frame...
Page 19
Folding The Stroller (Cont.) Using the Storage Strap With the stroller folded, detach the storage strap from the hook-and- loop on the side of the basket . Undo the the strap’s fastener and loop it around the nearest leg and handle .
Optional Accessories Rain Cover (supplied with some models) Using the Rain Cover Simply place the Rain Cover over the Seat Unit, ensuring it comfortably and securely protects the child Mosquito Net (supplied with some models) Using the Mosquito Net Simply place the Mosquito Net over the open portion, ensuring it comfortably and securely protects the child 17 | Optional Accessories...
Foot Cover (supplied with some models) Using the Foot Cover Place the foot cover over the lower section of the seat unit. Ensure the fl eece fl ap is under the handrail, then fold down over the handrail and fasten the press studs .
Care and Maintenance This stroller requires regular maintenance by the user. • Never force mechanisms or moving parts. If in doubt, please refer to the instructions. • Clean plastic and metal parts with a damp cloth or a light detergent. •...