Table of Contents
Advertisement
2 Charge Corona III
Corona III uses a rechargeable battery that must be charged fully before you use
the headset for the first time.
1.
Plug the Corona III AC charging adaptor into the headset's charging
socket.
2.
Plug the AC adaptor into the electrical outlet.
3.
Charge your headset until the red light turns to green light on Corona III .
The unit will be fully charged in approximately 2 hours.
5.
Remove the headset from the AC charging adaptor . You are now ready to
"pair" Corona III to your mobile phone. If the headset has already been
paired to your phone, then you can begin using it.
Fig. 2
! WARNING: Do not attempt to charge Corona III with anything other than the
AC adaptor provided. Using another AC adaptor may damage or destroy the
headset.
! IMPORTANT: The red indicator light will be on while charging and will turn
green when charging is complete. Removing the headset from the charging
cradle while it's charging will put the headset into standby mode and stop the
charging sequence.
! IMPORTANT: Corona III cannot be used while charging.
Hide quick links:
Advertisement
Table of Contents
