Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Talley ATTIVO
- Page 1 ...reducing avoidable harms ATTIVO™ Dynamic Seating System User Guidelines...
-
Page 2: Table Of Contents
Explanation of Label Symbols and Statements Caution Temperature limitation Refer to instructions of use / Humidity limitation booklet Atmospheric pressure limitation Medical Devices Directive 93/42/ Protect from heat and radioactive North America ETL listed sources Operating Instructions Class II Equipment (Double Insulated) WARNING Do not dispose of with the normal... -
Page 3: Introduction
Introduction Thank you for choosing to use the Talley ATTIVO™ seating system. In doing so you have selected an effective product for the prevention and management of pressure ulcers which is suitable for seated patients with reduced mobility who are at high risk of pressure damage. - Page 4 Battery replacement should only be carried out by qualified Talley service personnel. l The power unit must only be used with the approved power adapter supplied by Talley (see Specification on page 9).
-
Page 5: Installation And User Guidelines
Attach cushion air supply hose to power unit by matching up the alignment notch and groove on the ATTIVO™ power unit connection port and cushion hose connector and pushing together (Fig. 1). Ensure that this has been correctly clicked into place, otherwise a leak may occur. - Page 6 OPERATION BUTTONS The operation buttons on the face of the power unit provide the following functions. RUN/STOP Press to invoke stand-by mode prior to running power unit. Press again to run power unit. Press and hold whilst power unit is running (and unlocked) to cease operation and return to stand-by mode.
-
Page 7: Battery Information
Use only the mains adapter or optional vehicle adaptor supplied with the system. l When power unit operation times when running from the internal battery are noticeably shorter than normal, it is time to replace the battery pack. Contact Talley or authorised dealer for battery replacement service. - Page 8 ‘hours to service’ display. The unit contains no user serviceable parts and should only be serviced by either Talley or an authorised dealer. Talley will make available on request service manuals, component parts lists and other information necessary for Talley, an authorised dealer or a competent electrical engineer to repair or service the system.
-
Page 9: Fault Finding
Talley personnel to bag the equipment if the mattress has been in a known or suspected infectious environment. TRANSPORT AND STORAGE Handle with care. -
Page 10: Specifications
The above mains adapter is considered part of the ME equipment 12V vehicle power adapter is available as an optional accessory (99-01-14-05) The ATTIVO™ power unit must only be used with the specific external power adapters as supplied by Talley. -
Page 11: Emi/Emc Statement And Manufacturer's Declaration
From the other hand, medical devices must not interfere with other devices. IEC60601- ™ 1-2 also defines the maximum levels of emissions for these medical devices. The ATTIVO conforms to this IEC60601-1-2 standard for immunity and emission. Nevertheless, special precautions need to be observed: ™... - Page 12 TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromag- netic site survey should be considered. If the measured field strength in the location in which the ATTIVO™ is used exceeds the applicable RF compliance level above, the ATTIVO™...
Need help?
Do you have a question about the ATTIVO and is the answer not in the manual?
Questions and answers