Page 1
2-WAY Motorcycle alarm system All rights reserved The trademark, patent and copyright are owned by Steelmate Co., Ltd. Manual The right to change the design and specifications reserved...
Important notice Technical parameter Transmitter charging Please install the system by an authorized Connect the charger's plug to transmitter's charging engineer Operation voltage: 12V 3V socket, and then insert the charger into 100~240V Keep the product and the transmitters from Static current: <3.5 mA power supplier, the transmitter's battery can be...
Functions 1. Arming Press button twice, the turn signals will flash When the engine is running, press button once, 16. Sensitivity adjustment by transmitter When ignition is turned to off, press button to twice and the system will be disarmed completely. the engine will be stopped.
ECU installation Siren installation DC ignition installation diagram Please mount the Please mount the siren downwards as shown in the figures 1 or 2 below ECU downside as shown in the figure. ECU light installation Flameout wire 1. Drill a hole ( 8) around the block where it can be seen clearly.
Troubleshooting 1). Transmitter is ineffective or the control distance decreased significantly. Tall building, radio tower or high frequency electromagnetic wave may affect the control range. Low power of the battery. The transmitter is broken or damaged. The installation location of the antenna is wrong. You should straighten the antenna and keep it away from other wire harness.
Need help?
Do you have a question about the 886XO and is the answer not in the manual?
Questions and answers