Page 2
Definitions AMP and Advanced Micro Peripherals are the trading names for Advanced Micro Peripherals Inc. and Advanced Micro Peripherals Ltd. Disclaimer This document contains information on a new product. Specifications and information herein are subject to change without notice. AMP reserves the right to make changes to any products herein to improve functioning and design. Although the information in this document has been carefully reviewed and is believed to be reliable, AMP does not assume any liability arising out of the application or use of any product or circuit described herein.
Situational Awareness systems in the most demanding environment. The AVC8000nano allows each of the 8 video channels to be captured at full D1 size, all at full frame rate. The video can be scaled, cropped and positioned under software control.
1: Introduction AVC8000nano Features ▪ Real time video capture to system memory or overlay to system VGA screen ▪ 8 Live NTSC/PAL video inputs ▪ 8 x D1 size capture at full frame rate ▪ Arbitrary video window sizing, cropping and scaling ▪...
1: Introduction AVC8000nano Technical specification Video Input: 8 channels composite video Monochrome/color NTSC or PAL 8 10-bit Analog-to-Digital Converters Anti-aliasing filters on inputs 1V peak-to-peak (75 Ohm input impedance) Contrast adjustable from 0 – 255% of original Saturation adjustable from 0 – 200% of original...
NTSC/PAL video decoder. Video Digitization Composite NTSC or PAL video is input to the AVC8000nano through the U.FL connectors CX1 to CX8. The video is AC-coupled and fed to the on- board decoders of the individual frame grabbers. The video decoders automatically detect whether the incoming video signal is NTSC or PAL and generates the correct timing output signals.
1: Introduction AVC8000nano Ordering information The following part number(s) can be used when ordering: AVC8000nano 8-Channel Video Frame Grabber (0ºC to +60ºC) AVC8000nano-EXT Extended temperature version (-40ºC to +85ºC). Cable-AVC8000nano 8x U.FL to BNC cables (video inputs) Anti-static handling The board(s) supplied contain electrostatic components that are susceptible to permanent damage from electrostatic discharge (static electricity).
2: Installation AVC8000nano Jumpers and Connectors 3 CX4 VIN PAL/NTSC Video Input Low profile U.FL Connectors for connecting video sources to the AVC8000nano. U.FL Signal Channel 1 video input Channel 2 video input Channel 3 video input Channel 4 video input...
Page 12
The optional video input cables (from Cable-AVC8000nano) should be plugged into Cx to provide live video input to the AVC8000nano. For most recent BIOS and operating system software, the AVC8000nano is automatically detected. Software driver installation should be done from the supplied CD.
Contacting AMP Sales AMP’s sales team is always available to assist you in choosing the board that best meets your requirements. Contact your local sales office or hotline. Sales office US Sales office UK Advanced Micro Peripherals Inc. Advanced Micro Peripherals Ltd. Suite 1117, 149 Madison Ave 1 Harrier House, Sedgeway Business Park New York...