Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities. If the power cord is damaged, it must be replaced by a APURO agent or a recommended qualified technician in order to avoid a hazard. ...
Location of Controls Vacuum lid Vacuum gauge Control panel Controls A. On/Off Button (On/Off) After the machine is plugged in, LED display (G) will show Off, press the On/Off button, LED display (G) will show On. Now the machine is ready to use. After using the machine, press the On/Off button before unplugging the machine. During use pressing the On/Off button will stop the machine.
Use warm, soapy water and a damp cloth to clean the appliance. • Dry thoroughly after cleaning. • A APURO dealer or qualified technician should carry out repairs if required. WARNING: Do not allow any water to spill into the appliance when cleaning...
The Unit is not switched on Check the unit is plugged in correctly and switched on Plug and lead are damaged Call APURO agent or qualified technician Fuse in the plug has blown Replace the plug fuse Power supply Check Power Supply...
APURO. Every effort is made to ensure all details are correct at the time of going to press, however, APURO reserve the right to change specifications without notice...
DECLARATION OF CONFORMITY Equipment Type Vacuum pack machine Model GF439-A Legislation C-Tick Standards AS/NZS CISPR 14.1:2013 IEC 60335-1:2011 +A1 + A2 AS/NZ 60335-2-45:2012 Producer Name Apuro Producer Address 15 Badgally Road, Campbelltown, NSW 2560 I, the undersigned, hereby declare that the equipment specified above conforms to the above Legislation and Standard(s).
Need help?
Do you have a question about the GF439-A and is the answer not in the manual?
Questions and answers