Skoda KODIAQ2016 Owner's Manual page 239

Table of Contents

Advertisement

The manoeuvring dimensions are shown in the display
page 237.
Activation / deactivation
Read and observe
and
The system is activated by engaging reverse gear and pressing  the button
» Fig. 294
on page 236.
When the system is activated, the
The system is deactivated by pressing the button  (the symbol
ton is no longer illuminated).
Manoeuvring trailer
Fig. 295 Display of the instrument cluster: Manoeuvring trailer
Read and observe
and
Trailer manoeuvring
Select reverse gear or move the selector lever into position R.
Ensure that the vehicle/trailer combination is at a standstill.
Release the steering wheel and press  the button.
The steering is taken over by the system.
The symbol of the control button for the exterior mirror is shown in the display
» Fig. 295
- .
Tilt the adjusting knob for the exterior mirror
left or right according to the required direction of travel of trailer.
» Fig. 295
5
on page 236 first.
symbol lights up in the button.
on page 236 first.
» page
75, Exterior mirrors to
on
The display shows the silhouette of the vehicle rear with trailer in top view
» Fig. 295
- .
The actual position of the trailer is indicated by the silhouette
The target position of the trailer is indicated by the contour
Tilt the knob for the adjusting exterior mirror to adjust the trailer contour
to the target position.
Observe the direct vicinity of the vehicle and reverse carefully.
The set angle of articulation can be further corrected while reversing by tilting
the adjusting knob for the side mirrors.
in the but-
Stop the vehicle/trailer combination in the required position.
If a forward gear is engaged or the D / S mode set, the system is deactivated.
To align the vehicle/trailer combination (trailer and vehicle in a line), tilt the ad-
justing knob for the exterior mirror in the direction of arrow
trailer contour
3
Carefully reverse and drive forwards until the desired position of the vehicle
combination is achieved.
Note
The outer mirror surfaces cannot be adjusted while the system is active.
Automatic brake intervention
Read and observe
The systems is deactivated and an automatic braking intervention takes place
in the following situations.
If, during the manoeuvring,  the button is pressed, the driver's door is
opened or the steering wheel is gripped.
If the angle between the vehicle and trailer is assessed by the system as too
large during the manoeuvring procedure.
If a specific speed is assessed by the system as too high during the manoeu-
vring procedure due to the current angle between the vehicle and trailer and
the driver does not react to the warning braking intervention.
pivots to the position
.
4
and
on page 236 first.
.
2
.
3
3
» Fig.
295. The
1
237
Assist systems

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents