Before Using The Remote Control; Replacing Battery (Lithium Cr2025) Into The Remote Control - Philips MC138 User Manual

FM Antenna
● Extend coil antenna at the back of the unit fully
for optimum reception.
C
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", coloured (marked) wire to
"+" and black (unmarked) wire to "-".
● Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of + / - speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.

Before using the remote control

1
Pull out the plastic protective sheet.
2
Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example CD, TUNER).
3
Then select the desired function (for example
É, í, ë).
REPEAT SHUFFLE
Replacing battery (lithium
CR2025) into the remote control
A
1
Pull out the knob
2
Pull out the battery compartment
3
Replace a new battery and fully insert the
battery compartment back to the original
position.
A
PUSH
CAUTION!
Batteries contain chemical substances, so
they should be disposed off properly.
Preparations
VOL
SLEEP
slightly to the right.
B
.
PULL
B
11