EOT ET-3500AF User Manual

EOT ET-3500AF User Manual

Amplified high speed fiber photodetectors

Advertisement

Amplified High Speed
Fiber Photodetectors
User Guide
Electro-Optics Technology, Inc.
3340 Parkland Ct. Traverse City, MI 49686 USA
(231)935-4044 ‫ ׀ 2876-796)008( ׀‬sales@eotech.com ‫ ׀‬www.eotech.com
Page 1 of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ET-3500AF and is the answer not in the manual?

Questions and answers

Summary of Contents for EOT ET-3500AF

  • Page 1 Amplified High Speed Fiber Photodetectors User Guide Electro-Optics Technology, Inc. 3340 Parkland Ct. Traverse City, MI 49686 USA (231)935-4044 ‫ ׀ 2876-796)008( ׀‬sales@eotech.com ‫ ׀‬www.eotech.com Page 1 of 7...
  • Page 2: Table Of Contents

    EOT AMPLIFIED HIGH SPEED FIBER PHOTODETECTOR USER’S GUIDE Thank you for purchasing your Amplified High Speed Fiber Photodetector from EOT. This user’s guide will help answer any questions you may have regarding the safe use and optimal operation of your Photodetector.
  • Page 3: Iii. Troubleshooting

    B. Mount the detector to an optical stand by the mounting holes on the bottom of the detector housing. C. Clean the end of the fiber ferrule and connect to the laser. D. Connect the detector to the oscilloscope using a coaxial cable designed for 10GHz operation. The DC Monitor cable can be a general purpose cable.
  • Page 4: Iv. Drawings: Amplified High Speed Fiber Photodetectors

    1. The detector is probably saturated. You should lower the power incident on the detector to a level below the saturation point. Drawings: Amplified High Speed Fiber Photodetectors A. ET-3500AF, ET-4000AF, ET-5000AF Dimensions: Specifications: Amplified High Speed Fiber Photodetectors 120-10064-0001...
  • Page 5: Vi. Schematics: Amplified High Speed Fiber Photodetectors

    VII. Warranty Statement and Repair EOT warrants its products to be free from defects in material and workmanship and complies with all specifications. EOT will at its option, repair or replace any product or component found to be defective during the warranty period. This warranty applies only to the original purchaser and is not transferrable for a period of one year after date of original shipment.
  • Page 6: Viii. Glossary Of Terms

    If EOT determines the problem is not due to a manufacturer defect, repairs will be done at the customer’s expense. EOT will always provide a written quote for repair prior to performing repairs at the customer’s expense.
  • Page 7 SMA Connector: Used to connect the customer’s coaxial cable for high frequencies. Electro-Optics Technology, Inc. 3340 Parkland Ct. Traverse City, MI 49686 USA (231)935-4044 ‫ ׀ 2876-796)008( ׀‬sales@eotech.com ‫ ׀‬www.eotech.com Page 7 of 7...

This manual is also suitable for:

Et-4000afEt-500af

Table of Contents