1. Manuals
  2. Brands
  3. NT Cameras Manuals
  4. DVR
  5. NT-1208SI
  6. Quick manual

NT Cameras NT-1208SI Quick Manual

Digital video surveillance system version gui-3, nt-1200 si series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Digital Video
Surveillance System
This is a brief manual for quick and convenient reference.
Please refer to the User Manual contained in CD for details.
Quick Manual
Version
: GUI-3
st
1
Edition
: 7 May 2009
※ The picture might differ according to the specification and model.
※ Contents of this quick manual are protected under copyrights and computer program laws.
Thank you for purchasing !
Before operating the system, please read this User Manual thoroughly and retain it for future reference.

Advertisement

Table of Contents
loading

Summary of Contents for NT Cameras NT-1208SI

  • Page 1 Digital Video Surveillance System This is a brief manual for quick and convenient reference. Please refer to the User Manual contained in CD for details. Quick Manual Version : GUI-3 Edition : 7 May 2009 ※ The picture might differ according to the specification and model. ※...
  • Page 3 WARNING TO REDUCE FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. The installation should be made by a qualified service person and conformed to all local codes.
  • Page 4 Cautions Read Before System Operation Follow these details to prevent material damage or personal injury. Signs of Caution and Warning Warning: This sign indicates that the user could die or be seriously wounded if not used or installed properly. Caution: This sign indicates that the user could be wounded or could expect property damage if not used or installed properly.
  • Page 5 Caution 1. Use the power cord, which is supplied or recommended by the supplier. The internal fan rotates at high speed and may cause an accident. 2. Do not drop, give strong vibration, or shock to the product. It may cause malfunction. 3.

  • Page 7: Table Of Contents

    Contents GETTING STARTED ..................................1 ................................. 1 HECKING UPPLIED TEMS .............................. 1 ONNECTING ERIPHERAL EVICE ............................. 2 YSTEM TARTUP AND HUTDOWN EXPLANATION FOR EACH FUNCTION ..........................3 ....................................3 RONT ANEL ....................................4 ANEL IR R ................................5 EMOTE ONTROLLER OPERATION ....................................

  • Page 8: Getting Started

    1. Getting Started Checking Supplied Items Make sure that you have following items supplied with your DVR. If any of these items is missing or damaged, notify your vendor immediately. Keep the packing utilities for moving or storage purposes afterwards. Quick Manual : 1 Piece CD (Remote S/W &...

  • Page 9: System Startup And Shutdown

    System Startup and Shutdown 1.3.1. System Startup 1. [LOG-IN] screen is shown as left after DVR is turned on. Select the registered user Default USER ID and PASSWORD are “admin” and “1234”. 2. Click the keyboard icon to call virtual keypad. Input password, and then click [ENTER] button.

  • Page 10: Explanation For Each Function

    2. Explanation for Each Function Front Panel [DVR with Compact Case (270 x 71 x 215 mm)] 1. Power Button : Startup or shutdown 2. USB Port : Mouse or image backup 3. LED Indicator : Power/Record/Remote controller 4. E-Rec Button : Emergency recording 5.

  • Page 11: Rear Panel

    Rear Panel [DVR with Compact Case (270 x 71 x 215 mm)] 10 12 11 13 [DVR with 1.5U Height (360 x 66 x 380mm)] 10 12 1. Video-In : Connect camera 8. LAN Port : Connect 10/100 Ethernet cable 2.

  • Page 12: Ir Remote Controller

    IR Remote Controller The function buttons of the IR Remote Controller are as below. 1. Power Button 2. ID Selection Button 3. Numeric Button 4. PTZ Button 5. Preset Button on PTZ Mode 6. Focus Button on PTZ Mode 7. Zoom Button on PTZ Mode 8.

  • Page 13: Operation

    3. Operation User Log-in 1. Move the mouse to the lower part of the screen to open the hidden tool bar and click [TOOL] icon. 2. Click [USER] menu to open Log-In screen. 3. Change ID and input Password. Live Display Mode 3.2.1.

  • Page 14: Ptz Operation

    [Icons on the TOOL bar] : Instant(Emergency) recording start & stop to record current live images with maximum frame rate. : PTZ mode to control PTZ camera : Go the Playback mode. : Fixing tool bar to always open it or disable fixing. : Indicates HDD usage percentage by video recording.

  • Page 15: Playback Recording Images

    3.3.2. PTZ Control [Direction Control] Drag the mouse pointer to up/down or left/rightward to move camera position on pressing the left button of the mouse. [Speed Control] As the mouse pointer moves long away from the center, camera moves faster. Click the right button of the mouse to open Pop-up menu of PTZ Control.

  • Page 16: Quick Backup During Playback

    3.4.2. Playback Control [Playback Direction] Playback direction(forward & backward) can be controlled by mouse or control button of the front panel/IR Remote Controller clicking as well as Jog Shuttle control. [Playback Speed] Playback speed can be control 2, 4, 8, 16 & 32 times by clicking fast-forward/fast-rewind button repeatedly or Jog/Shuttle.

  • Page 17: Search Recording Image

    Search Recording Image Click the right button of the mouse to open pop-up menu or open menu on TOOL bar. And then, go to search menu. Or push [SEARCH] button on the front panel to open search menu. 3.6.1. Calendar Search 1.
  • Page 18 3.6.3. Event Log 1. Select date to search log. 2. Select log type to search. (Sensor / Motion / Video Loss / HDD Full) 3. Log list will be shown. 3.6.4. System Log 1. Select date to search log. 2. Select log type to search. (System / Setup / Network) 3.

  • Page 19: Dst Setting And Image Playback

    DST Setting and Image Playback 3.7.1. DST Setting 1. Go to [SYSTEM INFO] ( [MENU] ▶ [SYSTEM] ▶ ) 2. Click [DATE/TIME] to open setting menu. 3. Tick off “USE DST＂ and set “BEGIN＂/＂END＂. 4. Click [OK] to confirm. 3.7.2. Image Playback of Overlapped Data 1.

  • Page 20: Setting

    4. Setting General setting structure consists of “System”, “Device”, “Record”, “Network”, “Backup” and ‘Quick Setup” as below. Main Classification Sub Classification SYSTEM INFO USER SYSTEM EXPORT/IMPORT FACTORY DEFAULT CAMERA AUDIO SENSOR DEVICE MOTION ALARM EXTRA ALARM CAMERA RECORD SCHEDULE NETWORK NETWORK DDNS NOTIFICATION...
  • Page 21 4.1.1. System Info. This is to check system information status or change the system-related configuration. [Site ID] Setup ID to match with the ID in KEYBOARD. [Remote ID] Setup ID to match with the ID in IR Remote Controller. [Mac address] Unique identity number for each system..
  • Page 22 [Upgrade Firmware] Upgrade the system in “Upgrade Firmware” menu via DVD/CD/USB/FTP server. Caution It is recommended to proceed “HDD Format” after finishing the upgrade of firmware, because the data recorded by previous firmware may cause mal-function of DVR due to different format. The system setting value might be possible to be changed to that of factory default in the case that there are a lot of changes between new firmware version and existing firmware version in functions, etc.
  • Page 23 4.1.3. Export/Import Copy and paste the system configuration values [Export] Copy setting value to USB memory device. [Import] Call up setting value from USB memory device. 4.1.4. Check HDD status and select “Overwrite” or “Stop recording” when HDD becomes full. Each HDD can be formatted in this menu.

  • Page 24: Device

    Device 4.2.1. Camera [Title] Input title for each channel. [Covert] Hide camera display and playback. [Motion Detection Setting] Set motion detection area and sensitivity. 4.2.2. Audio Select audio input and output during live display, and match the audio input to a designated channel (Please refer to Section 4.3.1 Camera Record) 4.2.3.
  • Page 25 Caution Relay contact can stand up to 24V/1A of other devices. In the case that it is connected to the circuit which is over 24V/1A, it can cause a problem on the system. [Notify] Select how to be alerted upon sensor is activated or motion is triggered.
  • Page 26 4.2.6. “M” (Depending on the model of PTZ camera) If selected, the OSD menu of PTZ camera is imported and shown on the DVR monitor and hence user can make full PTZ setting. [Preset] 1) Set camera position and fit Zoom/Focus/Iris. 2) Input preset number.

  • Page 27: Record

    Record 4.3.1. Camera [On/Off] Switch “recording” on and off in each channel. [Resolution] Select resolution for the recording image. [FPS] Select frame per second for the recording image. [Quality] Select image quality. [Auto Del] System will delete video whatever is recorded longer than the number of days set. [Audio] Select audio for each video channel.
  • Page 28 2) At [MENU] [RECORD] [SCHEDULE], tick off “CONTINUOUS” and make schedule by selecting desired camera, day/time. Click [SAVE] button to confirm. icon on Live image screen means continuous recording works properly. [Motion Detection Recording : Green] 1) Set details at [MENU] ▶ [DEVICE] ▶ [CAMERA]. 2) Set details at [MENU] ▶...
  • Page 29 4) At [MENU] [RECORD] [SCHEDULE], tick off “MOTION” and make schedule by selecting desired camera, day/time. 5) Click [SAVE] button to confirm. icon will be shown on Live image screen and icon will be popped up when motion is detected. [Sensor Activated Recording : Orange] 1) Set details at [MENU] [DEVICE]...
  • Page 30 [Continuous + Motion Detection Recording : Sky Blue] 1) Set details at [MENU] ▶ [DEVICE] ▶ [CAMERA]. 2) Set details at [MENU] ▶ [DEVICE] ▶ [MOTION ALARM]. 3) Set details at [MENU] ▶ [RECORD] ▶ [CAMERA]. 4) At [MENU] ▶ [RECORD] ▶ [SCHEDULE], tick off “CONT+MOT”...
  • Page 31 [Continuous + Sensor Activated Recording : Dark Orange] 1) Set details at [MENU] ▶ [DEVICE] ▶ [SENSOR]. 2) Set details at [MENU] ▶ [RECORD] ▶ [CAMERA]. 3) At [MENU] ▶ [RECORD] ▶ [SCHEDULE], tick off “CONT+SENS” and make schedule by selecting desired camera, day/time.
  • Page 32 2) Set details at [MENU] ▶ [DEVICE] ▶ [SENSOR]. 3) Set details at [MENU] ▶ [DEVICE] ▶ [MOTION ALARM]. 4) Set details at [MENU] ▶ [RECORD] ▶ [CAMERA]. 5) At [MENU] ▶ [RECORD] ▶ [SCHEDULE], tick off “MOT+SENS” and make schedule by selecting desired camera, day/time. 6) Click [SAVE] button to confirm.
  • Page 33 Caution Dark Blue Color The data recorded during DST (Daylight Saving Time) will be indicated in Dark Blue color in Intelli-Search Bar on playback mode. [Emergency Recording] 1) Move mouse to the lower part of the screen to open Tool bar. 2) Click button.

  • Page 34: Network

    Network 4.4.1. Network Set details to use DVR over the network. [Fixed IP] 1) Set [NETWORK TYPE] to LAN. 2) Input [IP ADDRESS], [SUBNET MASK] and [GATEWAY] of your Local Area Network 3) Input [DNS SERVER], the IP Address of DNS Server provided by ISP (Internet Service Provider). 4) Input [TCP/IP PORT] (*) Default value is “9010”.
  • Page 35 1) Set [NETWORK TYPE] to DHCP. 2) Input [TCP/IP PORT] (*) Default value is “9010”. 3) Input [WEB PORT] (*) Default value is “80”. [Dynamic Public IP - In case that xDSL modem is used together with router] 1) Set [NETWORK TYPE] to LAN or DHCP. 2) Input [IP ADDRESS], [SUBNET MASK] and [GATEWAY] of your Local Area Network 3) Input [DNS SERVER], the IP Address of DNS Server provided by ISP (Internet Service Provider).
  • Page 36 4.4.3. How to Set DDNS [Setting in RemoteManager S/W] 1) Open Remote Option at [Setting] ▶ [Option]. 2) Input “cctv-link.net” to IP and “10000” to Port of DDNS section. 3) Open Site Property menu to register site. 4) Input “Mac address + cctv-link.net” to IP Address. (*) If Mac address is “00:1C:84:01:00:02”, then the format should be as “001c84010002.cctv-link.net”.
  • Page 37 4.4.4. Notification [Remote Notify] 1) Input IP Address of the system to be notified. 2) Input Port number. 3) Select event type to be notified. 4) Click [OK] to confirm. [E-Mail Notify] 1) Input SMTP and sender’s e-mail address. 2) Tick off “E-Mail Notify. 3) Click [ADD] to open setting menu.

  • Page 38: Backup

    Backup 4.5.1. Manual Backup 1. Go to [MENU] [BACKUP] [BACKUP]. * Quick Backup in Playback mode is available by pushing [ENTER] button twice(start/end) on the front panel. 2. After selecting desired channel and backup device, click [BACKUP] button. 3. Click [OK] after finishing backup procedure. 4.5.2.

  • Page 39: Quick Setup

    Quick Setup Quick Setup is to help user make simple configuration for recording resolution, entire recording speed by frame, recording mode, and recording periods. 1. Tick off “Use Quick Setup’. 2. Set details. 3. Tick off “Recording Time 1 & 2”. 4.

  • Page 40: Web Surveillance

    5. Web Surveillance Web Login 1. Input “IP Address” at address section of Internet Explorer, in case of LAN, of the desired DVR to connect. 2. Input “MAC Address.cctv-link.net” at address section of Internet Explorer, in case of DDNS, of the desired DVR to connect. 3.

  • Page 41: Web Configuration

    Web Configuration [Menu of Web Configuration] Main Menu Sub Menu SYSTEM INFO USER SYSTEM FACTORY DEFAULT SYSTEM REBOOT CAMERA AUDIO DEVICE SENSOR MOTION ALARM EXTRA ALARM CAMERA RECORD SCHEDULE NETWORK NETWORK DDNS NOTIFICATION QUICK SETUP QUICK SETUP 1. Click “Configuration” to get into configuration menu. After log in with the right ID and password, user can make various configuration in Web Configuration window as below.

  • Page 42: Web Monitoring

    [Record] [Network] [Quick Setup] Web Monitoring Click [WEB MONITORING] on the top-right menu to monitor live image of the DVR through Internet Explorer. 2 & 3...

  • Page 43: Web Playback

    1. Select channels for connect or disconnect. 6. PTZ control 2. Connect selected channel. 7. On & Off audio 3. Disconnect selected channel. 8. On & Off Deinterlace 4. Go to Web Configuration page. 9. Select display of 1, 4, 9 or 16 screen mode 5.

  • Page 44: Quick Trouble Shooting

    6. Quick Trouble Shooting 1. Remote Surveillance is not working (Remote Manager, CMS, WEB Configuration) Check LAN cable connection to the LAN port on the rear panel of the DVR Check NETWORK setting value of the DVR Check whether Router or other network devices in your network environment are set correctly. 2.

This manual is also suitable for:

Nt-1204si

Table of Contents