Reset Plextalk To Factory Defaults - Shinano Kenshi PTP 1 User Manual

 Use the Number 4 or 6 key to go to the "Control panel" option
and select it by pressing the Enter key.
 Use the Number 4 or 6 key to go to the "System properties"
option and select it by pressing the Enter key.
 The system version and serial number will be played
repeatedly.
 When you have noted the information that you require, press
the Enter key to exit the menu system.
NOTE: The serial number should also be printed on the label on the
inside of battery housing.

21.2. Reset PLEXTALK to factory defaults.

If, for any reason, you need to set all the PLEXTALK settings back to
their factory defaults, this can be achieved very simply. This section
details what the default settings are and how to reset PLEXTALK.
21.2.1. Factory default settings.
The following is a list of all the default settings for the PLEXTALK
PTR2. If the "Clear all settings" function is used, all these settings will
be reset to the values listed.
Volume: 10
Guide volume: 10
Speed: Normal
Tone: Normal
Recording level: 10
Bookmark: All cleared
Simple Bookmark: All cleared
Voice Bookmark: All cleared
Resume Bookmark: All cleared
Setting of playing voice bookmark: Voice bookmark on
119