Operation; Technical Information - Microlab B 56 User Manual

Illustrations
Media
player
CD\ VCD \ DVD
Blu-Ray player
Mp3 \ Mp4
EN
Media player
5
PC or Notebook
Connection
1. Connect the USB type A interface to the PC's USB port or any USB hub. This is
required to power the speaker system.
2. Connect the other end to the speaker 's mini-USB plug.
3. Next connect the 3.5mm stereo jack to your media player such as PC / Notebook, CD /
DVD player, or Mp3 / Mp4 player.
4. Place the speakers apart, one on the left and the other on the right of the l istening
position.
To USB port or HUB for power
To media player with
3.5 mm stereo jack
Left speaker Right speaker
Master volume
dial
mini-USB plug

Operation

1. Start the media playback.
2. Adjust the master volume on the wired remote control to your preferred level.

Technical Information

Amplifier
Output power, RMS
Frequency response
Signal/Noise ratio
Separation
Speakers
Tweeter driver type
Tweeter rated power
Interfaces
Output
Input
Dimensions
Product dimensions, mm
Product Net weight, kg
3 Watt
100 Hz - 18 kHz
> 70 dB
> 50 dB
2"
3 Watt
EN
Fixed wiring
6
3.5mm stereo