GoVideo NOA Setup And Walkthrough Manual page 3

4
Welcome to the GoVideo Family!
We would like to welcome you to the GoVideo Family.
By this time you have opened the box, now let's get to know Noa.
In the box you should find
the following items:
1 camera 4 CR123A
batteries
Directions for preparing your camera:
1. Remove all the pieces from their plastic bags.
2. Unscrew the camera from the base.
3. Open the battery bay inside the camera.
4. Insert the batteries. Polarity is shown on the lid.
5. Close battery lid and slide clip closed.
6. Screw base back onto the camera.
7. Wait 1 Minute. You should see a slow flashing
blue LED light.
(If the camera is not slow flashing blue, press the reset button for 3
seconds. See the diagram.)
1 mounting 1 bag of screws
plate
Reset Button
Once unscrewed, flip camera up.
Unscrew (You will need a pin to push reset button)
5