1、Introduction Thank you for choosing the K-PO K-100 mini CB radio. The K-PO K-100 is a small and easy to use CB radio with an excellent performance. Please read this manual carefully before installing or using the radio. 2、Installation instructions Check all materials before installation.
3、Control panel function Front view Short Press Long Press Name Function Function Microphone ① socket AM/FM Mode ② Scan Function Switch ③ LCD Display Power On/Off ④ Volume...
⑤ Channel Channel ⑥ Selection Up/Down Channel 9/19 ⑦ (Emergency Switch Channel) Enter RF GAIN ⑧ Mode Enter SQ (ASQ) Switch To ASQ ⑨ SQ (ASQ) Level Switch Mode 4、Operation 4.1 Power On/Off the radio 1. Turn VOL switch clockwise to power on the radio. 2.
Page 5
the channel. 2. Hold microphone button 【UP】/【DOWN】 to change channels fast.
2. Shortly press microphone button 【UP】 / 【 DOWN】 to change the ASQ level. 3. Hold microphone button 【UP】 / 【 DOWN】 to change the ASQ level fast. 4. Hold the【SQ】key or wait for 3 seconds to safe the settings and exit the menu.
Page 8
3. Shortly press【EMG】key for the third time to return to last used channel.
4.9 Key lock 1. Hold the【EMG】key for over 2 seconds to lock the keys, LCD display shows ‘LC’. 2. Hold【EMG】for over 2 seconds again to unlock the keys, LCD display shows ‘OF’. 4.10 Scan function 1. Hold the 【 A/F】 key to start the scan function, the LCD display shows ‘SC’.
40 FM 27.60125-27.99125MHZ 40 FM / 40 AM 26.960-27.400MHZ 34 FM / 34 AM 26.965-26.865MHZ 40 FM / 40 AM 26.965-27.405MHZ 80 FM 26.565-26.955MHZ 27 FM / 27 AM 26.965-27.275MHZ 4.12 Restore factory default 1. Hold【SQ】key while powering the radio on, until the LCD display shows ‘RT’.
Page 11
AM Modulation Index: 80%-90% RX sensitivity: 0.25uv@12db...