Panasonic FZ-A2 Series Operating Instructions Manual page 21

n Display
No display.
The screen is dark.
There are red, green, or
blue dots on the screen,
or there is unevenness in
colors and brightness on
the screen.
n Screen Input Operation
The pointer does not
work.
Cannot operate the
touchscreen.
n Battery Status Indicator
Blinking orange.
Lighting red.
n Others
No response.
l The computer entered sleep mode by the power-saving function. To
resume, press the power switch.
l If the brightness setting of this computer is set to automatic brightness
mode, the screen brightness automatically changes depending on the
ambient brightness.
l Disable automatic brightness mode and change the brightness of the
screen.
The following are not malfunctions.
l Although advanced high-precision technologies are used in the pro-
duction of color LCD screens, 0.002% or less of the picture elements
may be dark or remain constantly lit (more than 99.998% of elements
function properly).
l Due to the natural characteristics of LCD screens, you may notice
unevenness in colors and brightness depending on your angle of view.
Hues may also vary by product.
l When using the external mouse, connect it correctly.
l Press (Power switch) to enter to sleep mode, then press
switch) to wake up.
l The battery cannot be charged temporarily. Remove the AC adaptor,
then connect it again.
l The remaining battery charge is approximately 9 % or less. Charge the
battery pack.
l Press and hold (Power switch) until "Power off" screen is displayed
and touch [OK], then press
l If the application does not work normally, uninstall and reinstall the ap-
plication. To uninstall :
A Touch - [
B Touch the application you want to uninstall, and touch [Uninstall].
C Uninstall the application by following the on-screen instructions.
(Power switch) to turn it on.
Settings] - [ Apps].
(Power
21