Logitech ConferenceCam Connect Quick Start Manual page 8

Hide thumbs Also See for ConferenceCam Connect:

Logitech ConferenceCam Connect

1. Video Conferencing Mode:

1. Connect the USB cable to the device and to your USB port.

2. To start a call from your PC or Mac application,

select Video Conferencing Mode on ConferenceCam

Connect. The camera and speakerphone LEDs will flash

to show that connection is taking place, and when

completed, the camera LED will light steady for a few

seconds and the speakerphone will play a sound. If these

activities do not take place, try again and then consult

Troubleshooting or call technical support.

3. Ensure that ConferenceCam Connect is selected as

the default video and audio device in your OS settings

and in your conferencing application. Start your video

or audio call from your application. The LEDs on the

camera and speakerphone will alight when streaming.

2. Bluetooth Mode

To connect ConferenceCam Connect speakerphone

to your mobile device:

1. Select Bluetooth mode on the ConferenceCam Connect.

2. If your device is NFC enabled, touch the mobile device

to the NFC icon on the speakerphone, which should

enable Bluetooth acceptance on the mobile device,

or hold down the Bluetooth button until the LED on

the speakerphone starts blinking blue rapidly.

3. On your mobile device, go to settings and turn on

Bluetooth to connect. The ConferenceCam Connect

will also play a sound to acknowledge connection.

8 English

Table of Contents

Conferencecam cc3000e