Philips FW-D1 User Manual page 15

Dim mode
You can select the desired brightness for
the display.
• Press DIM to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
™ The
appears on the display.
DIM
™ "DIM 1", "DIM 2", "DIM 3" or
"DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyser On
FTS TITLE CHAP. FM LW A M W SLEEP SLEEP DIM TIMER
P1 P2 P3 P4 P5 P6
DIM 1 - normal brightness with
Spectrum Analyser Off
FTS TITLE CHAP. FM LW A M W SLEEP SLEEP DIM TIMER
P1 P2 P3 P4 P5 P6
DIM 2 - half brightness with Spectrum
Analyser On
FTS TITLE CHAP. FM LW A M W SLEEP SLEEP DIM TIMER
P1 P2 P3 P4 P5 P6
pg 001-41/D5-D1/21-Eng new 15
DIM 3 - half brightness with Spectrum
Analyser Off and all LEDs on the
system will be switched off.
FTS TITLE CHAP. FM LW A M W SLEEP SLEEP DIM TIMER
P1 P2 P3 P4 P5 P6
Volume Control
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
Sound Control
For Optimal sound listening, you can
only select one of the following sound
controls at a time : VEC, PERSONAL or
DSC .
VIRTUAL ENVIRONMENT CONTROL
(VEC)
The VEC feature enables you to adjust the
system to select a type of environment.
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
VEC setting : HALL, CLUB, DISCO,
CINEMA, CONCERT or ARCADE.
™ The selected environment is
encircled.
™ "HALL, CLUB, DISCO,
CINEMA, CONCERT or
ARCADE" will be displayed.
6/8/01, 11:32 AM
OPERATING THE SYSTEM
PERSONAL SOUND
You can store up to 6 personal settings.
1 Press to select the PERSONAL feature.
2 Adjust the JOG to select the desired
Personal setting.
™ The selected personal setting number
will appear on the display.
™ If no name has been stored
previously, "PERSONAL X" will be
displayed. "X" is the setting number.
Personal Setting
You can adjust the personal setting to your
desired level with the JOG control.
1 Press and hold PERSONAL for about 5
seconds to switch on the personal
setting mode.
™ "SELECT PRESET NUMBER" will
be displayed.
2 Adjust the JOG to select the desired
preset number for personal setting and
press á to confirm the selection.
™ "ADAPT LOW FREQ LEVEL" will
be displayed.
3 Adjust the JOG to select the desired
Spectrum Analyser band level for low
frequency.
™ The level will increase or decrease
between+3 and -3.
4 Press á to confirm the selection.
™ "ADAPT MID FREQ LEVEL" will
be displayed, followed by "ADAPT
HIGH FREQ LEVEL".
3139 115 20054
15