Advertisement

Quick Links

NanoCam3D Mk.1 Instruction Manual
1 Introduction and Designated Use.................................................................................................3
1.1 Safety Instructions................................................................................................................4
1.2 Quick Start Guide.................................................................................................................. 4
2 Optional Camera Setup................................................................................................................ 4
2.1 Control Elements..................................................................................................................5
2.2 Video Norm Setup.................................................................................................................5
2.3 3D Video Mode Setup........................................................................................................... 5
2.4 Reset to Factory Default Settings.........................................................................................6
2.5 Sensor Vertical Adjustment...................................................................................................6
2.6 Side-by-Side Offset Adjustment............................................................................................7
2.7 Auto Exposure Adjustments..................................................................................................8
3 Warranty....................................................................................................................................... 9
4 Disposal and Environmental Protection........................................................................................9
5 Manufacturer Information and Technical Support.........................................................................9
6 Regulatory Notes........................................................................................................................ 10
6.1 United States of America....................................................................................................10
6.2 Canada............................................................................................................................... 10
6.3 European Union..................................................................................................................11
Figure 1: Camera front and rear side................................................................................................3
Figure 2: Control Elements...............................................................................................................5
AE
ESD
FS
CVBS
FPV
SBS
SELV
IMPORTANT - READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Contents
List of Figures
List of Abbreviations
Page 1 of 12
Subject to change without notice.
Auto Exposure
Electrostatic Discharge
Field-Sequential
Color Video Blanking Signal
First Person View
Side-by-Side
Separated/Safety Extra Low Voltage
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NanoCam3D Mk.1 and is the answer not in the manual?

Questions and answers

Summary of Contents for TMG NanoCam3D Mk.1

  • Page 1: Table Of Contents

    NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Contents 1 Introduction and Designated Use....................3 1.1 Safety Instructions........................4 1.2 Quick Start Guide........................4 2 Optional Camera Setup........................ 4 2.1 Control Elements........................5 2.2 Video Norm Setup.........................5 2.3 3D Video Mode Setup......................
  • Page 2 IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE TMG - Ingenieurbüro UG (haftungsbeschränkt), the “Manufacturer”, is disclosing this Document and Intellectual Property (hereinafter “the Product”) to you for the intended use as a FPV camera for radio controlled model aircraft. The Manufacturer expressly disclaims any liability arising out of the application or use of the Product.
  • Page 3: Introduction And Designated Use

    KEEP FOR FUTURE REFERENCE 1 Introduction and Designated Use NanoCam3D Mk.1 is a stereoscopic FPV camera for radio-controlled vehicles, in particular for micro quad-copters. The camera is delivered in a pre-calibrated and ready-to-use state. The factory settings of the camera are: Video norm: PAL, ...
  • Page 4: Safety Instructions

    3D mode manually. See the manual of your FPV goggle if unsure how to put the goggle into 3D-mode. Enjoy your first flights with NanoCam3D Mk.1 and become familiar with FPV in 3D. 2 Optional Camera Setup The camera has only two control elements on the front side: push buttons 1 and 2.
  • Page 5: Control Elements

    NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE 2.1 Control Elements Figure 2: Control Elements Status LED State Remark No power supply. Camera out of operation. Normal operation. Blinking Camera in setup or adjustment mode.
  • Page 6: Reset To Factory Default Settings

    NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Power on camera and release push button 2. The camera’s status LED starts to flash.  Flashing cycle indicates current 3D-mode and image swap setting (SBS no swap = repeated single flash, SBS swapped = repeated double flash, FS no swap = repeated triple flash, FS swapped = repeated quadruple flash).
  • Page 7: Side-By-Side Offset Adjustment

    NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE The camera is now in online calibration mode, which is indicated by a slow LED flashing  cycle. There are two different adjustment modes (Sensor Vertical Adjustment Mode = repeated single flash, Side-by-Side Offset Adjustment Mode = repeated double flash), here the required Sensor Vertical Adjustment Mode is automatically preselected.
  • Page 8: Auto Exposure Adjustments

    NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE The camera now is in online calibration mode, which is indicated by a slow LED flashing  cycle. Currently there are two different adjustment modes (Sensor Vertical Adjustment Mode (default) = repeated single flash, Side-by-Side Offset Adjustment Mode = repeated double flash).
  • Page 9: Warranty

    NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Press push button 2 and keep it pressed for ca. 1 sec until the status LED flashes fast, then  release push button 1. The camera now is in online AE algorithm selection mode and displays the currently active ...
  • Page 10: Regulatory Notes

    NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE 6 Regulatory Notes 6.1 United States of America Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 11: European Union

    NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE 6.3 European Union Declaration of Conformity TMG - Ingenieurbüro UG (haftungsbeschränkt) Römerstr. 14 89077 Ulm GERMANY declare under our sole responsibility, that the product Product name...
  • Page 12 NanoCam3D Mk.1 Instruction Manual IMPORTANT – READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Notes Page 12 of 12 Subject to change without notice.

Table of Contents