Page 1
FarmBoy ™ FB - BC- 8642 / 8652 Operation Manual All ‘FarmBoy’ products are sold without any warranty or guarantee. Please satisfy yourself before buying this product. No returns, exchanges or refunds allowed. KisanKraft Machine Tools Pvt. Ltd. Sri Huchhanna Tower, #4,1...
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Before Getting Started Before using the machine for the first time be sure to read through this manual in order to avoid wrong operation. Please preserve this manual properly so that it can provide you with information whenever necessary.
Page 4
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Wear protective The port to refuel the "MIX gloves. FUEL" Wear safety The guaranteed noise level footwear With this symbol the Danger: Toughing manufacturer confirms that the rotating blade is this tool is in accordance forbidden.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Safety Instructions Read this manual carefully until you completely understand and follow all safety and operating instructions. Keep this manual handy so that you may refer to it later whenever any questions arise. Also...
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Working Circumstance Never start the engine inside a closed room or building. Exhaust gases contain dangerous carbon monoxide. Never use the product, When the ground is slippery or when you can’t maintain a steady posture.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Before Starting the Engine The area within a perimeter of 50 feet (15m) of the person using the product should be considered a hazardous area into which no one should enter. If necessary, yellow warning rope, warning signs should be placed around the perimeter of the area.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 After starting the engine, check to make sure that the cutting attachment stops rotating when the throttle is moved fully back to its original position. If it continues to rotate even after the...
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Maintenance In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals. Always be sure to turn off the engine before performing any maintenance or checking procedures.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Application If the Brush cutter is fitted with cutting string as trimmer as attachment, it is used for cutting grass grown in park, garden and around tree or fence. If the Brush cutter uses metal cutting blade as attachment, used for cutting grass, weed or light plant.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Assembly Installing Handle Loosen the 4bolts on the upper cap and insert the handles equally. Retighten the bolts. Put the handle assembly into the bracket and put the upper cap over it. Tighten the cap securely.
Page 12
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Installing Cutting Head Put the angled bar (1) into the side holes of the gear case (2) and the plate (3) so as to fasten the axle. Mount the trimmer head (8) on the axle.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 How to Wear Wear the provided harness without twisted bands, with the hanger on your right side. (1) Hanger Balance the Unit Hook your machine to the hanger. Adjust the bands of the harness to have the blade...
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Mixed fuels which have been left unused for a period of one month or more may clog the carburetor or result in the engine failing to operate properly. Put remained fuel into an air-tight container and keep it in the dark and cool room.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Push the primer pump several times until overflown fuel flows out in the return tube. Move the choke lever to the closed position. Note:In the adjacent figure, (1) Choke lever (2) Closed position (3) Open position Set the ignition switch to the “start”...
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Adjusting Idling Speed: When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise. When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw.
Page 17
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Adjusting the Line Length: Your brush cutters is equipped with a semiauto type nylon line head that allows the operator to advance the line without stopping the engine. When the line becomes short, lightly tap the head on the ground while running the engine at full throttle.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 length so that the cutting head may become parallel to the ground Cutting Method: Use the front left side cutting. Guide the blade from your right to left with it tilted slightly to your left.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Refilling Trimming Line: For replacement line, use a diameter of 2.4mm (.095in). The spool is capable for a line up to 6m (20ft) on the 10cm (4”) head. Avoid using a larger line as it may cut down the trimming performance.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Spark Plug: Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a replacement plug, use the correct type ...
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank during transport.
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Technical Specifications Model FB-BC-8652 FB-BC-8642 Engine type Air-cooled, 2-stroke Equipment mobility Hand-held Maximum engine power 1.6kW (2.2 hp ) 1.2kW (1.6 hp) Engine displacement 52 cc 42.7 cc Engine Max speed...
BRUSHCUTTER FarmBoy ™ FB - BC- 8642 / 8652 Parts List – Body (Brushcutter) Sl No. Part Name Sl No. Part Name Housing Aluminium pole Bolt M5 x 25 Gearbox Assy Bolt M5 x 12 3- Teeth blade Bolt M6 x 25...
Page 27
KisanKraft PRODUCT RANGE KisanKraft has a large range of products to serve the farmers. A list of our products is given below: Brush Cutters and Accessories Cultivators and Accessories Brush Cutter/Power Weeder Petrol and Diesel Backpack Brush Cutter Sprayers and Accessories Tea Pruner Pole pruner with Engine Battery Sprayer...
Page 28
KisanKraft Wide Range of Products for Every Need MISSED CALL: 07676065555 For more information give Many of our products have BIS: ISI certification. : www.kisankraft.com : info@kisankraft.com : +91.80. 22178200 Page 28 of 28...