Advertisement
Power Supply
VT101
includes
three
rechargeable batteries.
VT101 can run from batteries or
from the USB cable.
The Ni-MH batteries will recharge
automatically, without removal of the
batteries, if you use the USB cable to
connect VT101 to your computer or the
USB power adapter.
When the recharger is in the power-off
mode, the white LEDs will flash
twice every three seconds. If the
recharger is in power-on mode, the
icon will be shown on screen.
After completely charging in the power-off mode, the white
LEDs will flash once every three seconds. After completely
charging in the power-on mode, the
on screen.
Recharge Ni-MH batteries every few months, even if the
system is not used to maintain battery strength, this is
suggested to extend longevity.
For lengthy storage periods, remove batteries to prevent
damage due to battery leakage/ discharge.
VT101 may also use alkaline batteries. Do not mix battery
types in use and do not recharge alkaline batteries.
Ni-MH
icon will be shown
Accessories
Power-adapter: Plugs into wall socket and into USB cable.
Will accept 100V ~ 240V AC and output 5V DC.
Mini-USB cable: Used for data communications and
battery charging.
Settings
Power Saving: To set the time
period for automatic power shut off.
To push any key except " Power "
to dismiss the sleepy mode.
Status Display: To turn on/off
display of screen status.
Brightness: To set 4 phases of LED brightness .
White Balance: To turn on/off Auto- White correction.
Delete all pictures: To delete all pictures in memory.
Factory Default: Returns to all original settings.
Image Effects
Gray (G): To remove color and create a gray-scale image for
easier image discrimination.
Inverse (I): To reverse color and/or grayscale to help
highlight some given features.
Emboss (E): Normal emboss algorithm. Useful to accentuate
some given image features.
Dual Window View (D): Allows two window views
including the left max. Magnification of the highlighted
3
Advertisement
