Setup, tuning and maintenance of your Spinner Rear Shock Congratulations on getting a bike with Spinner suspension. To ensure the best performance and longest service life from your Spinner shock, please read and carefully follow these setup, tuning and maintenance instructions. CAUTION! All Spinner products must be installed by a qualified bicycle mechanic using appropriate professional tools.
Page 3
100 to 250 psi range. c. Rebound Rate: Some Spinner Air Shock models have a red rebound control knob (see illustration above). Rebound rate is the rate at which the shock returns to its static (sag) position after compression.
You need to increase the spring rate. c. Rebound Rate: Some Spinner Coil Shock models have a red rebound control knob (see illustration above). Rebound rate is the rate at which the shock returns to its static (sag) position after compression.
The warranty in the USA is 12 months. If you are outside the USA, please contact the Spinner authorized distributor in your country for the LIMITED WARRANTY. This warranty is extended to the original owner only, and is subject to the following terms and conditions.
Need help?
Do you have a question about the Sus and is the answer not in the manual?
Questions and answers