Table of Contents
Advertisement
Sorting the TV stations
&n@:
To change
TVl
from programme
position "03 to programme position
"01".
Programme position
01
02
03
...........
TV
station
TV3
TV2
: Tvl
:
1
2
3
4
\
..... ....:
t
Press the PRESET button.
Using the CHANNEIJI13ACKING
(+ or -)
button select the desired TV station (e.g. TVl ).
I
TV1
I
Using the numeric buttons (O– 9), enter the
target programme position number (e.g. "01 ").
Press the OK button
Repeat steps 2 to 4 to change another TV
station programme
position number.
5 When finished, press the PRESET button.
Clock setting
Example:
Date... 9 December,
1997
1
2
3
Time.., 16:15
Press the MENWTV button.
When the date and time are not set, the
CLOCK SET screen will be displayed.
Press the numeric 4 button.
Set the date and time using the numeric
buttons (O- 9).
Enter in sequence, 0912971615.
CLOCK SET
~09-~i-Z9Y----i65 i-5-;
I
[+/-l
+Tl ME SHIFT
[ CLEAR 1 TO CORRECT
[OK I. ENTER
I
If you entered
a wrong number,
press the
CLEAR button to delete it, then enter the
correct number.
Summer time/standard
time adjustment
Press the CHANNE~RACKING
(+ or -) button
to advance or retard the clock by one hour.
4 When finished, press the OK button.
Seconds will start counting from "00 as the
OK button is pressed.
The normal TV broadcast screen will return.
Additional tuning adjustments
Fine tuning
If the tuning is not optimum,
it can be
improved
by manual
fine tuning.
1
Press the PRESET button.
2 Press the FF or REW button to obtain the
best possible picture and sound.
3 Press
the OK button.
4 When finished, press the PRESET button.
Skip function
If only programme
position numbers 1 to 30
have been preset, set the skip function for
programme
position numbers 31 to 88, so that
only the preset TV stations will appear when
pressing the CHANNEUTRACKING
(+ or -)
button.
1
2
3
4
Repeat steps 2
to 4 for every programme
position number to skip.
5 When finished,
press
the PRESET button.
Press the PRESET button.
Using the numeric buttons or the
CHANNELITRACKING
(+ or -) button,
select the programme
position number to
skip.
Press the CLEAR button. The "S indicator
will light.
To cancel the skip function,
press the
CLEAR button again to erase the "S"
indicator.
Press the OK button.
Manual tuning
This tuning mode can be used to modify the
settings entered by the Auto tuning function,
or to manually preset the TV stations to
particular programme position numbers.
1
Press the PRESET button.
2 Using
the CHANNE~RACKING
(+ or -)
button, select the desired programme
position number.
3 Press the PLAY button.
If the search stops on a broadcast other
than the one desired, press the PLAY
button again until the broadcast from the
desired TV station appears on the TV
screen.
4 Press the OK button when the desired TV
station appears on the TV screen.
Repeat steps 2 to 4 to preset another TV
station to another programme
position number.
5 When finished, press the PRESET button.
2
PREPARATION
%
CHANNEU
TRACKING
(+,-)
PRESET
CLEAR
o-9
0
0
0
OK
iew Zealand only)
uning or presetting the VCR
hannels
his is very important for correct
-Code operation.
Ieally for simpler operation,
lannels should be preset as
Illows:
=
]r additional channels in your area
is over to you to select the most
lgical channel position to place
Iem,
C
When you use the G-Code
function to programme a
recording from a certain
channel for the first time, it will
ask you the programme
position number that channel
was preset to. That setting will
be memorized and
automatically set the next time
the same channel is selected.
8
Advertisement
Table of Contents
