1. Manuals
  2. Brands
  3. PREDATOR X4 Manuals
  4. Mouse
  5. VENOM X4
  6. Setup software instruction

PREDATOR X4 VENOM X4 Setup Software Instruction

Mouse controller combo
Hide thumbs

Advertisement

Table of Contents

X
4
TM
V
enom
mouse controller combo
Setup Software Instruction
Thank you for purchasing the Venom-X4 product. Please read this instruction before using the
software to set up your Venom-X4.
X
V
4
Introduction
TM
enom
Tuact's Venom-X4 Mouse controller set consists of three devices -- a high performance
game Mouse, a left hand Wand controller and a Transceiver.
Venom-X4 has extensive customization and can be programmed and configured to tailor
your own playing style. It has the ability to map the buttons, configure the settings and save
up to 6 different game profiles in memory to switch on the fly.
The Venom-X4 setup software can be found and downloaded from Tuact's website at:
www.tuact.com/software/VenomX4-Setup-Installer.exe
It is a "green" software that doesn't need you to install a driver and can be totally removed
from your computer.
The Venom-X4 setup software can be installed on Windows XP , Windows 7, 8 and 10.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VENOM X4 and is the answer not in the manual?

Questions and answers

Summary of Contents for PREDATOR X4 VENOM X4

  • Page 1 enom mouse controller combo Setup Software Instruction Thank you for purchasing the Venom-X4 product. Please read this instruction before using the software to set up your Venom-X4. Introduction enom Tuact’s Venom-X4 Mouse controller set consists of three devices -- a high performance game Mouse, a left hand Wand controller and a Transceiver.

  • Page 2: Hardware Connections

    Hardware connections Before you start to run the setup software the first time, you need to connect your Venom-X4 Transceiver and Mouse to your computer (in PC mode), this would allow your PC to install the driver for them. Your system would identify the Venom-X4 Transceiver and the Mouse, then install drivers for them separately.

  • Page 3: Profile Operation

    Profile Operation Venom-X4 stores configuration settings and button Layout into one pro- file for one game. There's up to 6 game profiles of each platform that can be stored in the Venom-X4 Transceiver memory. Profiles are identified by color – Red, Blue, Orange, Cyan, Purple and Green, each color corresponds to the LED color on Transceiver.
  • Page 4 Configuration User can download Tuact factory game specific profile for configuration. If you want to tweak the settings for your own style, you can adjust the parameters in the “configura- tion” window. You can adjust mouse X and Y axis speed, the Y axis speed is expressed by Y/X ratio. For example, Y/X ratio 1.4 means the Y speed is 1.4 times of the X speed.
  • Page 5 Speed Up: Speed Up is another speed multiplier to boost the tracking speed. It will further multiply the mouse speed and the ADS speed. It can be used when you are in vehicle, aircraft, or super quick turning regardless of accuracy. The Speed Up is mapped to a pre-defined button or key, hold the Speed Up button to turn it on, and release it to turn it Off.
  • Page 6 Aim Down Sight Lock: Lock the Aim scope on sight, you do not need to hold the button while snipe aiming for long period of time. Note: In the case that some games already have the Aim Down Sight Lock function, this function needs to be turned off.
  • Page 7 Follow the steps below to assign the mapping: 1. Click on the Map1 or Map2 selection check box to map them separately. 2. Move your cursor on a definition box, it will highlight its corresponding controller button. 3. Click the definition box to pop up the definition window, select the device type icon, then pick a key from the “Buttons”...
  • Page 8 Side Buttons Mapping on the 3rd Party Mouse : Some of the 3rd party mouse are equipped with extra buttons, if those buttons could be setup to work as keyboard by their own software, they can be defined in the type of “key- board”...

  • Page 9: Mouse Setup

    MOUSE SETUP Venom-X4 mouse stores 3 CPI settings in memory that are identified by color: Green, Blue and Red. You can switch the preset CPI on the fly by pressing the CPI button. The effective resolution is indicated with the LED color. The 3 colors on the slider bar correspond to the mouse LED colors.
  • Page 10 APPLY THE SETTINGS Save Your Settings: There is an “Apply” button in Configuration, Layout and Mouse Setup windows, when you complete the adjustment and setup, press the “Apply” button to save the settings and layout to the Transceiver or mouse hardware and to take effective. Note: Pressing “Apply”...

  • Page 11: Technical Support

    When the Transceiver or Mouse is recognized by the software, a highlighted logo will show up, it is ready to upgrade. Select the firmware source and press the “Upgrade” button to load firmware and write into the hardware. There are two sources to get firmware: Manufacture: Connect your PC to the Internet to get firmware from factory.

Table of Contents

Save PDF