Preparations; Inserting Batteries Into The Remote Control; Switching On The System; Setting Up The Surround Sound System - Philips - MX3660D Quick Use Manual

Inserting batteries into the
remote control
Open the battery compartment.
1
Place the batteries in the
2
compartment with the correct
polarity as indicated by "+" and "-"
symbols.
Close the cover.
3
CAUTION!
– Remove batteries if they are exhausted or will
not be used for a long time.
– Do not use old and new or different types of
batteries in combination.
– Batteries contain chemical substances, so they
should be disposed of properly.

Switching on the system

After completing all the connections, connect the AC
1
power cord of the player and subwoofer to the power
outlet.
Press STANDBY ON to switch on the last selected
2
source.
Adjust the SOURCE button (or press TV/AV, DISC,
3
TUNER or AUX) to select the input source.
➜ The selected source will be displayed.
G For viewing a DVD or VCD disc, a TV set needs to be
connected (refer to "Connections - Connecting a TV and
additional components").
Switch on the TV and set to the correct video in channel
(for example, EXT1, EXT2, AV1, AV2). Refer to your TV
instruction manual for details.
➜ The default screen appears on the TV.
G You can connect other external components to the DVD
system in order to use the Home Theater Audio System's
surround sound capabilities. For example, connect to a TV
and select TV/AV as the input source or connect to a VCR
and select AUX as the input source.
Setting up the surround sound
system
You must connect all the speakers and set up the system
properly in order to enjoy the Digital Cinema experience at
home (refer to "Connections - Connecting the speakers").
You will have the feeling of being in the middle of the action
because sound is coming from everywhere around you.
The subwoofer can enhance the bass performance of your
system dramatically.
IMPORTANT!
Please sit at your usual listening position in order
to set up the speaker balance correctly.

Placing the speakers

To obtain the best surround effect, place the speakers as
follows.
Place the front left and right speakers at equal distances
1
from the TV and at an angle of approximately 45 degrees
from the listening position.
Place the center speaker above or below the TV so the
2
center channel's sound is localized.
Place the surround speakers at normal listening ear level
3
facing each other or mounted on the wall.
Place the subwoofer on the floor near the TV.
4
Notes:
– To avoid magnetic interference, do not position the front
speakers too close to your TV.
– If the rear surround speakers are installed farther away
from the listening position than the front and center speakers,
it will weaken the surround effect.
– All speakers should be securely installed to prevent
accidents and improve sound quality.

Preparations

11
P
REPARATIONS