Page 1: Table Of Contents
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES. CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES 312278517320 Published by Philips CE Copyright reserved Subject to modification Aug, 03, 2007...
Page 2: Revision List
HUDSON 8 Revision List Version Release Date Revision History Aug.03, 2007 Initial release Nov.07, 2007 Update C907 in Item 16 Nov.24,2007 Add Philips 12NC for 715GT039 A...
Page 3: Important Safety Notice
HUDSON 8 Important Safety Notice Proper service and repair is important to the safe, reliable operation of all Philips Company Equipment. The service procedures recommended by Philips and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose.
Page 4: Monitor Specifications
HUDSON 8 1. Monitor Specifications...
Page 5 HUDSON 8...
Page 6: Lcd Monitor Description
HUDSON 8 2. LCD Monitor Description The LCD monitor will contain a main board, a power board and a key board which house the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each voltage.
Page 7: Operation Instructions
HUDSON 8 3. Operating Instructions 3.1 General Instructions Press the power button to turn the monitor on or off. The other control buttons are located at the front of the panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences. The power cord should be connected.
Page 8 HUDSON 8 Rear View...
Page 9: Adjusting The Picture
Description of the On Screen Display On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on...
Page 10 HUDSON 8 The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
Page 11: Connecting To The Pc
HUDSON 8 3.4 Connecting to the PC 1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. 2) Connect to PC (a) Turn off your computer and unplug its power cable.
Page 12: Input/Output Specification
HUDSON 8 4. Input/ Output Specification 4.1 Input Signal Connector Analog connectors Pin No. Description Pin No. Description Red video input DDC +3.3V or +5V Green video input Logic Ground Blue video input Ground Sense (GND) Serial data line (SDA) Cable detect (GND) H.
Page 13: Factory Preset Display Modes
HUDSON 8 4.2 Factory Preset Display Modes 4.3 Pixel Defect Policy...
Page 14 HUDSON 8...
Page 15 HUDSON 8...
Page 16: Failure Mode Of Panel
HUDSON 8 4.4 Failure Mode Of Panel Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.
Page 17: Block Diagram
HUDSON 8 5. Block Diagram 5.1 Software Flow Chat...
Page 18 HUDSON 8 1) MCU initialize. 2) Is the EPROM blank? 3) Program the EPROM by default values. 4) Get the PWM value of brightness from EPROM. 5) Is the power key pressed? 6) Clear all global flags. 7) Are the AUTO and SELECT keys pressed? 8) Enter factory mode.
Page 19: Electrical Block Diagram
HUDSON 8 5.2 Electrical Block Diagram 5.2.1 Main Board Panel Interface (CN402) Scalar NT68665MFG EEPROM Keypad Interface (Include MCU, ADC, OSD) M24C16 (CN407) (U203) (U204) D-Data H sync D-Clock Crystal V sync 12.000MHZ DVI_SDA, (X201) VGA_SDA, DVI_SCL VGA SCL D-Sub Connector Connector (CN101)
Page 20 HUDSON 8 5.2.2 Inverter/Power Board AC input Bridge Rectifier Transformer Rectifier diodes EMI filter and Filter Start Circuit: R905 CN902 Feedback PWM Control IC Circuit IC901 ON/OFF Output Transformer MOSFET Circuit ON/OFF Lamp Over Voltage Control Control IC Feedback IC801 Circuit...
Page 21: Schematic Diagram
HUDSON 8 6. Schematic 6.1 Main Board 715G2561-1 DVI/D-SUB +5V_ESD BAV70 DVI_5V D102 FB101 DVI_VDD 120 OHM DVI_5V BAV99 BAV99 BAV99 BAV99 FB107 D103 D104 D101 D105 RX2P RX2M RX1P RX1M C102 C103 C104 C105 C106 C107 0.1uF 16V 0.1uF 16V 0.1uF 16V 0.1uF 16V R106...
Page 22 HUDSON 8 MCU+SCALAR PARTS NONE OD U203 NT68665 NT68670 CN202 G2 C201 F5 R209 C202 F8 C203 B3 FB202 DVI_VDD C204 B3 C205 B3 120OHM R228 C206 C3 C207 C3 ADC_VAA MCU_VDD C208 C3 C209 D2 R218 C210 D3 C211 D9 TCLK1M C212 D4 C213 E2...
Page 23 HUDSON 8 DC-DC U303 PANEL_VCC CN301 C301 C302 C303 R302 R303 C304 C302 10uF/16V C303 330 OHM 1/4W 330 OHM 1/4W C305 0.1uF 16V C306 R305 C307 10K 1/16W C308 C309 Q302 U301 R307 AO3401 C310 AP1117D33LA +3.3VCC C311 C304 51K OHM 1/16W C312 R308 4K7 1/16W...
Page 24 HUDSON 8 CONNECTOR CN402 modify +3.3VCC 1/18 TCLK1M TCLK1P CN401 B4 CN402 A4 CN403 F2 CN404 E6 CN401 CN405 F5 CN406 D1 CN407 D4 C401 F8 R407 C402 C8 C403 C8 TCLK2M KEY1_PAD KEY1 TCLK2P KEY2_PAD C404 D8 C405 C2 POWER C402 100R 1/16W...
Page 25: Power Board
HUDSON 8 6.2 Power Board 715G2594-1 POWER 1/4W R951 BD901 1/4W R952 KBP208G C920 1/4W R953 0.001uF/500V FB903 BEAD BD901 A1 CN901 E1 CN902 C8 C900 E4 D920 L921 SBT150-10LST 3.5uH F902 C901 B2 C902 B2 T901 0R05 1/4W C903 B2 C904 B8 80GL17T-33-N2 C907 B2...
Page 26 HUDSON 8 INVERTER PT801 R801 0R05 1/10W 5% POWER X'FMR CN801 +12V L801 CONN C801 R802 10pF/3KV 100R 1/8W 5% R850 R810 R805 R804 0R05 1/10W 5% 4.7K 1/10W 5% Q802 R808 Q801 1/4W 10K 1/10W 1% PDTC144WK PDTA144WK 1/4W CN802 ON/OFF R806...
Page 27: Key Board
HUDSON 8 6.3 Key Board 715G1755-2 CN101 CONN LED-G LED-O KEY2 R101 K-PWR K-PWR CN101 KEY1 100R 1/10W 5% R100 C101 KEY2 0R05 1/8W C102 add on Mar.-31-07 C103 KEY1 C104 C101 C102 C103 C104 C105 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF C105 LED1...
Page 28: Pcb Layout
HUDSON 8 7. PCB Layout 7.1 Main Board 715G2561-1 C101 C215 D105 Q301 R144 R410 C102 C216 D106 Q302 R201 R411 C103 C219 D107 Q305 R202 R412 C104 C220 D108 Q402 R205 R413 C105 C222 D109 Q403 R206 R414 C106 C301 D110 Q404...
Page 29 HUDSON 8...
Page 30: Power Board
HUDSON 8 7.2 Power Board 715G2594-1 BD901 D4 J802 C801 J803 C805 J804 C811 J805 C812 J806 C900 J808 C901 J809 C902 J810 C903 J811 C907 J812 C909 J817 C910 J819 C911 J901 C920 J903 C921 J904 C922 J905 C923 J906 C924 J909...
Page 31 HUDSON 8 C802 J907 R843 C803 J908 R844 C804 Q801 R845 C806 Q802 R846 C807 Q803 R847 C808 Q804 R848 C809 Q805 R849 C810 Q806 R850 C813 Q807 R851 C814 Q808 R852 C815 Q809 R853 C816 Q810 R900 C817 Q811 R901 C818 Q812...
Page 32: Key Board
HUDSON 8 7.3 Key Board 715G1755-2 CN101 A1 LED1 C101 C102 C103 C104 C105 R100 R101 R102 R103 R104 R105 R106 R107 R108 R109...
Page 33: Wiring Diagram
HUDSON 8 8. Wiring Diagram Lamp Wire Harness CN402 Panel Lamp Wire Harness Power Wire Harness CN801 Panel Interface CN902 CN802 CN301 CN402 Power Board Main Board CN407 CN804 CN901 CN803 CN102 CN101 D-SUB AC-IN Key Board Wire CN101 Key Board...
Page 34: Mechanical Instructions
HUDSON 8 9. Mechanical Instructions 1. Back View as Fig1 Place the monitor face down on a smooth surface as Fig 1. Be careful to avoid scratch and injury during the uninstallation. Fig1 2. Remove the cable management as Fig2. Fig2...
Page 35 HUDSON 8 3. Remove the base as Fig3~Fig4. Fig3 Fig4...
Page 36 HUDSON 8 4. Remove the stand as Fig5 and Fig6. Remove the four screws to remove the stand. Fig5 Fig6...
Page 37 HUDSON 8 5. Remove the hinge as Fig7. Remove the three screws to remove the hinge. Fig7 6. Remove rear cover as Fig8~Fig11 a. Remove 2 screws to remove rear cover as Fig8. b. Use plastic putty knife to release 3 snaps on the bottom as Fig. 9 - Fig.11 Fig8...
Page 38 HUDSON 8 3 snaps on the bottom Fig9 Plastic putty knife Fig.10 Fig11...
Page 39 HUDSON 8 c. Insert plastic putty knife into the gap between front bezel and back cover to release 4 snaps on the left, 4 snaps on the right and 4 snaps on the top as Fig12 - Fig15 Insert plastic putty knife into the gap between front bezel and...
Page 40 HUDSON 8 4 snaps on the top Fig15 7. Remove shielding as Fig16. Remove 8 screws as Fig16. Fig16...
Page 41 HUDSON 8 8. Remove main board and power board as Fig17. Remove 7 screws to remove main board and power board as Fig17. Fig17 9. Remove the bezel as Fig18- Fig20 a. Remove 2 screws to remove the key board as Fig18 b.
Page 42 HUDSON 8 Fig19 Fig20 10. Remove the main frame as Fig21- Fig22 a. Remove 2 screws at the right of main frame Fig21. b. Remove 2 screws at the left and 1screw at the bottom of the main frame Fig22. Fig21...
Page 43 HUDSON 8 Fig22 11. The end as Fig23. Fig23...
Page 44: Trouble Shooting
HUDSON 8 10. Trouble Shooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Page 45 HUDSON 8...
Page 46: Repair Flow Chart
HUDSON 8 11. Repair Flow Chart 11.1 Main Board (1). No Power No power Press power key and look if the picture is normal Please reinsert and make sure the AC of 100-240 is normal Reinsert or check the Adapter/Inverter section Measure U301 PIN2=3.3V Measure U304 PIN2=1.8V...
Page 47 HUDSON 8 (2). No Picture No picture Measure U301 PIN2=3.3V Measure U304 PIN2=1.8V Replace D301, U301 or U304 X201 oscillate waveforms are normal Replace X201 Check if the sync signal from computer is output and video cable is connected normally Input the sync signal of computer, or change the cable...
Page 48 HUDSON 8 (3). White screen White screen Measure Q301 base X201 oscillate is high level? waveform is normal Replace X201 Check Q301, Q302 is broken or CN402 solder? Check reset circuit of U203 is normal Check Correspondent Check Correspondent component. component.
Page 49 HUDSON 8 11.2. Power/Inverter Board (1) No power Check CN902 pin4, 5 = 12V Check AC line volt 110V or 220V Check AC input Check the voltage of C907 (+) Check bridge rectified circuit and F901 circuit Check start voltage for the pin8 of IC901 Check R905 and Change IC901 Check the auxiliary voltage is bigger than 10V and smaller than 20V...
Page 50 HUDSON 8 (2) W / LED, No Backlight Check CN902 pin4, 5 = 12V Check adapter or MB Check ON/OFF signal Check Interface board Check IC801 PIN12=12V Change Q801 Check IC801 PIN10, 9 have the output of square wave at short time Change IC801 Check Q804, Q809 PIN5, 6, 7, 8 have the output of square wave at short time Check Q804, Q805, Q806, Q809, Q810, Q811...
Page 51 HUDSON 8 11.3 Key Board OSD is unstable or not working Connect Key Pad Board Is Key Pad Board connecting normally? Is Button Switch normally? Replace Button Switch Is Key Pad Board normally? Replace Key Pad Board Check Main Board...
Page 52: Isp Instructions
HUDSON 8 12. ISP Instruction (1). Install the program software First decompressing files , as follow:...
Page 53 HUDSON 8 b. Double – click , start to install as follows:...
Page 54 HUDSON 8...
Page 55 HUDSON 8...
Page 56 HUDSON 8 c. There will be a shortcut key appears on the desktop. (2). Connect the ISP board as follow: Connect to the Connect to Philips 170V8 the PC LPT a. Double-click ，running the program as follows:...
Page 57 HUDSON 8 b. Click icon, search the program” PHILIPS_170V_LPL_LM170E03_V1.01.hex”, and click open:...
Page 58 HUDSON 8 c. Click icon, the writer is in processing… d. Until appears the follow Fig, writer completed.
Page 59: Ddc Instructions
HUDSON 8 13. DDC Instruction General DDC Data Re-programming In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect, repaired monitor’ the serial numbers have to be re-programmed. It is advised to re- soldered the main EEPROM with Software DDC from the old board onto the new board if circuit board have been replaced, in this case the DDC data does not need to be re-programmed.
Page 60 HUDSON 8...
Page 61 HUDSON 8...
Page 62 HUDSON 8...
Page 63 HUDSON 8 Click to complete the installation. Note: After installation, you must restart the PC to take the setup to effect.
Page 64 HUDSON 8 2. Install the “WinDDC_ setup” Second, you must install the . The processing as follows:...
Page 65 HUDSON 8...
Page 66 3. Connect the DDC board as follow: Connect to the PC LPT When you write analog EDID, Connect this port to the Philips 170V8’s VGA port When you write digital EDID, Connect this port to the Philips 170V8’s DVI port 12V Input...
Page 67 HUDSON 8 4. Take analog DDC write for example, as follow a. Double-click ，appear as follow Figs：...
Page 68 HUDSON 8 b. Click c. Key 14 numbers in the Serial Number blank, then click “OK”. Now analog DDC Write completes, as follow. Note: The way of digital DDC write is the same as analog DDC write.
Page 69 HUDSON 8 170V8 EDID Analog 128 bytes EDID Data (Hex): x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00 FF FF FF FF FF FF 00 41 0C 5D 08 C3 B6 01 00 10: 17 0B 01 03 0E 22 1B 78 EE AD B0 A2 57 4A 9C 25 20: 11 50 54 BF EF 80 71 4F 81 40 81 80 01 01 01 01 30: 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70...
Page 70 Detailed Timing: 1280x1024 @ 60Hz. <-x-Detailed Timing Descriptions-x-> <---Detailed Timing Descriptions---> Detailed Timing: FF (Monitor SN) '231312311232' Detailed Timing: FC (Monitor Name) 'Philips 170V' Detailed Timing: FD (Monitor limits) Min. V. rate: 56Hz Max. V. rate: 76Hz Min. H. rate: 30KHz Max.
Page 71 HUDSON 8 170V8 EDID Digital 128 bytes EDID Data (Hex): x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF 00 FF FF FF FF FF FF 00 41 0C 5D 08 07 B2 01 00 10: 0F 11 01 03 80 22 1B 78 2A AD B0 A2 57 4A 9C 25 20: 11 50 54 BF EF 80 71 4F 81 40 81 80 01 01 01 01 30: 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70...
Page 72 Detailed Timing: 1280x1024 @ 60Hz. <-x-Detailed Timing Descriptions-x-> <---Detailed Timing Descriptions---> Detailed Timing: FF (Monitor SN) '111171511111' Detailed Timing: FC (Monitor Name) 'Philips 170V' Detailed Timing: FD (Monitor limits) Min. V. rate: 56Hz Max. V. rate: 76Hz Min. H. rate: 30KHz Max.
Page 73: White Balance, Luminance Adjustment
HUDSON 8 14. White Balance, Luminance Adjustment 1. Apparatuses and program: analyzer CA-210, PC, tool, FGA adjustment program (FGAWB0.15SN), Pattern generator. 2. Equipment installation: a. Connect analyzer CA-210 to PC by USB connector, install drive program CA-SDK Ver4.00 for CA-210 and restart PC after finish installing.
Page 74 HUDSON 8 4. Color Temp confirmation Connect the signal to the monitor, the monitor display white-picture, use CA-210 to measure the Color Temp of the screen center and select the OSD to make sure whether the Color Temps accord with the SPEC.
Page 75: Monitor Exploded View
HUDSON 8 15. Monitor Exploded View...
Page 76: Recommended & Spare Parts List
095G8014 7D514 WIRE HARNESS FQ006 095G8014 7X514 WIRE HARNESS FQ007 705GQ734307 STAND&BASE ASS'Y FQ008 750GLG70E3L12M000F PANEL LM170E03-TLL1 PHILIPS LPL FQ009 750GLG70E3L42M000F PANEL LM170E03-TLL4 PHILIPS LPL FQ010 750GLC70A7P43M000F PANEL CLAA170EA07P 040 FZ PHP CPT FQ011 750GLC70A7P53M000F PANEL CLAA170EA07P 050 FZ PHP CPT...
Page 77 HUDSON 8 Spare Parts List Service Kit Description Part No. Philips 12NC Remark DDC Kit 715L2005C2 9965 000 43197 for all model OSD SN Kit 715GT033 C 9965 000 43252 for all model for all hudson 7 NOVATEK ISP Kit...
Page 78 095G8014 7D514 WIRE HARNESS FQ006 095G8014 7X514 WIRE HARNESS FQ007 705GQ734307 STAND&BASE ASS'Y FQ008 750GLG70E3L12M000F PANEL LM170E03-TLL1 PHILIPS LPL FQ009 750GLG70E3L42M000F PANEL LM170E03-TLL4 PHILIPS LPL FQ010 750GLC70A7P43M000F PANEL CLAA170EA07P 040 FZ PHP CPT FQ011 750GLC70A7P53M000F PANEL CLAA170EA07P 050 FZ PHP CPT...
Page 79 HUDSON 8 Board Parts Location Part No. Description Philips 12NC FQ021 CBPC7GNAPHQ5 SCALER BOARD ASSY(LPL) FQ022 CBPC7CNAPHQ2 SCALER BOARD ASSY(CPT) C302 067G305V100 3 105℃ 10UF +-20% 16V C315 067G305V101 3 105℃ 100UF M 16V C310 067G305V101 3 105℃ 100UF M 16V...
Page 80 HUDSON 8 R127 061G0402101 RST CHIPR 100 OHM +-5% 1/16W R126 061G0402101 RST CHIPR 100 OHM +-5% 1/16W R109 061G0402101 RST CHIPR 100 OHM +-5% 1/16W R108 061G0402101 RST CHIPR 100 OHM +-5% 1/16W R412 061G0402102 RST CHIPR 1 KOHM +-5% 1/16W R312 061G0402102 RST CHIPR 1 KOHM +-5% 1/16W...
Page 81 HUDSON 8 R101 061G0402750 RST CHIPR 75 OHM +-5% 1/16W FB105 061G0805000 0 OHM 1/10W R302 061G1206331 RST CHIPR 330 OHM +-5% 1/4W R303 061G1206331 RST CHIPR 330 OHM +-5% 1/4W C123 065G0402102 32 1000PF +-10% 50V X7R C131 065G0402102 32 1000PF +-10% 50V X7R C303 065G0402104 12...
Page 82 HUDSON 8 C220 065G0402220 31 CHIP 22PF 50V NPO C219 065G0402220 31 CHIP 22PF 50V NPO C128 065G0402330 31 33PF +-50% 50V NPO C127 065G0402331 32 CHIP 330PF 50V X7R 065G040247132K C132 CAP CHIP 0402 470PF 50V X7R C129 065G0402473 12 CHIP 0.047uF 16V X7R C126 065G0402473 12...
Page 83 HUDSON 8 D101 093G 6433S DIODE BAV99 SEMTECH ZD201 093G 39G586 RLZ2.2B ZD107 093G 39S 24 T RLZ 5.6B LLDS ZD106 093G 39S 24 T RLZ 5.6B LLDS ZD105 093G 39S 24 T RLZ 5.6B LLDS ZD104 093G 39S 24 T RLZ 5.6B LLDS ZD103 093G 39S 24 T...
Page 84 D920 093G 60276 DIODE SBT150-10LST SANYO IC801 056G 379 22 IC TL494IDR SOIC-16 IC901 056G 379 61 LD7575PS SOP-8 Q902 057G 417 4 PMBS3904/PHILIPS-SMT(04) Q811 057G 417 4 PMBS3904/PHILIPS-SMT(04) Q810 057G 417 4 PMBS3904/PHILIPS-SMT(04) Q807 057G 417 4 PMBS3904/PHILIPS-SMT(04) Q803...
Page 85 HUDSON 8 R813 061G0603101 RST CHIPR 100 OHM +-5% 1/10W R823 061G0603103 RST CHIPR 10 KOHM +-5% 1/10W R821 061G0603105 RST CHIPR 1 MOHM +-5% 1/10W R836 061G0603105 RST CHIPR 1 MOHM +-5% 1/10W R844 061G0603220 RST CHIPR 22 OHM +-5% 1/10W R845 061G0603220 RST CHIPR 22 OHM +-5% 1/10W...
Page 86 HUDSON 8 R912 061G1206100 RST CHIP 10R 1/4W 5% R905 061G1206103 RST CHIPR 10 KOHM +-5% 1/4W R931 061G1206103 RST CHIPR 10 KOHM +-5% 1/4W ZD801 061G1206103 RST CHIPR 10 KOHM +-5% 1/4W R810 061G1206150 RST CHIPR 15 OHM +-5% 1/4W R837 061G1206150 RST CHIPR 15 OHM +-5% 1/4W...
Page 87 HUDSON 8 C914 065G0805471 21 CHIP 470PF 25V NPO D810 093G 64 33 DIO SIG SM BAV99 (PHSE)R D801 093G 64 33 DIO SIG SM BAV99 (PHSE)R D802 093G 64 33 DIO SIG SM BAV99 (PHSE)R D809 093G 64 33 DIO SIG SM BAV99 (PHSE)R D808 093G 64 38 D...
Page 88 HUDSON 8 LED1 081G 12 1F GP LED 3 GP32032M/G307-ZY-50 R109 061G0603000 RST CHIPR 0 OHM +-5% 1/10W R101 061G0603101 RST CHIPR 100 OHM +-5% 1/10W R104 061G0603242 RST CHIPR 2.4 KOHM +-5% 1/10W R108 061G0603242 RST CHIPR 2.4 KOHM +-5% 1/10W R102 061G0603432 RST CHIPR 4.3 KOHM +-5% 1/10W...
Page 89: General Product Specification
MECHANICAL CHARACTERISTICS 5.1 COSMETIC PHILIPS ID 5.2 MECHANICAL DATA FILES PROE FILES REQUIRED 5.3 LOCATION OF PHILIPS LOGO PER PHILIPS MAKE-UP SHEET 5.4 GAP BETWEEN PANEL AND FRONT BEZEL <0.8 (TYP) MM 5.5 LOCATION OF CONTROL ICONS PER PHILIPS GRAPHIC SHEET 5.6 COLOR FOR RESIN/PAINT...
Page 90 6.3 DISPLAY DISTURBANCES FROM EXTERNAL ENVIRONMENT 6.4 DISPLAY DISTURBANCES TO EXTERNAL ENVIRONMENT RELIABILITY 7.1 MEAN TIME BETWEEN FAILURES QUALITY ASSURANCE REQUIREMENTS 8.1 ACCEPTANCE TEST PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY REGULATORY COMPLIANCE 10.1 WORLDWIDE REGULATORY 10.2 EMC REQUIREMENTS 10.3 ROHS 10.4 WEEE...
Page 91: Foreword
30 minutes that brightness stability is optimal, and follow strictly after panel specification. 2. PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt base. 2.1 LCD...
Page 92: Scanning Frequencies
HUDSON 8 AUO M170EG01 VD Resolution : 1280x1024 (SXGA) Outside dimensions Pitch ( mm ) : 0.264 mm x 0.264 mm Color pixel arrangement : RGB vertical stripes Display surface : Anti-glare type, Hardness 3H Color depth : 16.7 M color (RGB 6 bits + FRC data) Backlight : CCFL Active area(WxH)
Page 93 HUDSON 8 Fix with monitor when packing, with transplant pin protective cover. Connector type : D-Sub male with DDC2B pin assignments. Blue connector thumb-operated jack screws Pin assignment: Pin No. Signal Green/ SOG Blue Sense (GND) Cable Detect (GND) Red GND Green GND Blue GND DDC +3.3V or +5V...
Page 94: Timing Requirement
HUDSON 8 Pin Assignment: Pin No. Description T.M.D.S. data2- T.M.D.S. data2+ T.M.D.S. data2 shield No Connect No Connect DDC clock DDC data No Connect T.M.D.S. data1- T.M.D.S. data1+ T.M.D.S. data1 shield No Connect No Connect +5V Power Ground (for +5V) Hot plug detect T.M.D.S.
Page 95 HUDSON 8 3.3.1 Mode storing capacity Factory preset modes : 11 Preset modes : 45 User define modes : 12 Note: 1. Screen displays perfect picture at 11 factory-preset modes. 2. Screen displays visible picture with OSD warning when input modes are the 45 preset modes. 3.3.2 Factory preset modes (11 modes) Factory modes and preset modes are defined in the enclosed timing table file.
Page 96 Yes: Auto adjustment for displaying timing mode and recall factory preset OSD Languages –8 Power On Logo: Power On show up Philips logo 3 second change to input signal This picture is reference only. The official drawing will send out by PM.
Page 97: Horizontal Scanning
HUDSON 8 OSD Tree 3.4 Horizontal scanning Sync polarity : Positive or Negative Scanning frequency : 30 – 83 K Hz 3.5 Vertical scanning Sync polarity : Positive or Negative Scanning frequency : 56 - 76 Hz...
Page 98: Power Input Connection
Tune at least. 3.12 EDID Data for EDID & .inf file 1 User visible strings on .inf file Philips 170V (17inch LCD MONITOR 170V8) 2 Manufacturer ID ( EDID data) 3 Product ID, "xxxx" 4 codes MSB(byte 12): 08 LSB (byte 11): 56...
Page 99: Smart Contrast (Dynamic Contrast Ratio)
HUDSON 8 3.14 Smart contrast (Dynamic contrast ratio) Smart Contrast is a kind of dynamic backlight control. This function changes the panel backlight dynamically according to the frame brightness histogram. the contrast ratio has to be 3000:1(typical). 3.15 Smart Image 3.15.1Smart Image OSD outlook (Economic Economy) 3.15.2Smart Image OSD outlook...
Page 100 HUDSON 8 3.15.2.5Linkage between Smart Image OSD and main OSD A. Settings within main OSD have linkage with Smart Image OSD. Brightness Contrast iii. Color Temperature B. Because each preset profiles will define default setting of these 3 parameters. Users can understand what is the value of that in preset profile by open the main OSD.
Page 101: Visual Characteristics
HUDSON 8 D. Economy i.Purpose: Adjust brightness level for reducing power consumptions ii.No optimization by Smart Image. iii.Design: 1. Brightness level set to 70%, a little higher brightness level than laptop PC, fine tune brightness level before DVT exit. 2. Color temperature set to 6500K. 3.
Page 102: Brightness Uniformity
HUDSON 8 4.4 Brightness uniformity Set contrast at 100% and turn the brightness at 100%. Apply the Fig 1, it should comply with the following formula: B_min X 100% >75% B_max Where B_max =Maximum brightness, B_min = Minimum brightness 4.5 Check Cross talk (S) Apply Pattern 2.
Page 103: Mechanical Characteristics
5.1 Cosmetic - Philips ID 5.2 Mechanical data files - ProE files required 5.3 Location of Philips logo - Per Philips make-up sheet 5.4 Gap between panel and front bezel < 0.8 (typ) mm 5.5 Location of Control icons - Per Philips Graphic sheet 5.6 Color for resin/paint -...
Page 104: Plastics Flammability
(bezel, back cover, base). Plastic resin type selection should be referred to “TY R83-2-9002-1”s. 5.11 Texture/Glossing of housing The texture area and texture no should follow Philips make-up sheet. The exterior surfaces shall have a uniform texture. Philips must approve the mold texturing.
Page 105: Product Dimension/Weight (Prefer To Sht 191)
HUDSON 8 5.15 Product dimension / Weight (Refer to SHT 191 ) Unit dimension : 403mm (W) * 392.5 (H) * 171mm(D) Packed unit dimension : 482mm(W) * 189mm(H) * 488 mm(D) for WW : 490mm(W) * 191mm(H) * 497 mm(D) for China Net weight 4.6Kg (Including I/F cable 300 g) Gross weight...
Page 106: Pallet/Container Loading
HUDSON 8 5.17 Pallet / Container loading Transportation standards refer to TYE-M0002. Air shipment - Sea container 20'(pallet/slip sheet) Sea container 40'(pallet/slip sheet) Sea container 40' High Cube (pallet/slip sheet) Truck shipment- Transportation request for all region except China/India A. Air shipment B.
Page 107: Acceptance Test
Control II level AQL: 0.4 (major) 1.5 (minor) (Please also refer to annual quality agreement) Customer acceptance criteria: UAW0377/00 9. Philips’ Flat Panel Monitors Pixel Defect Policy Philips’ Flat Panel Monitors Pixel Defect Policy BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL...
Page 108 HUDSON 8 Fig 1: Measurement locations of Brightness Uniformity Fig 2: Cross talk pattern Gray level 46 (64 Gray level) Fig 3: Cross talk Pattern Center at Gray level 0 (Black)
Page 109 HUDSON 8 SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1...
Page 110: Regulatory Compliance
HUDSON 8 10. REGULATORY COMPLIANCE 10.1 Worldwide Regulatory Domain Safety / EMC / Ergonomics / Standards Documents Country CB Report IEC60950-1:2001. Group -and national differences International and CB of all countries listed in CB Bulletin No. 107A certificate European Low Voltage Directives 73/23/EEC and Declaration of 93/68/EEC Conformity...
Page 111 HUDSON 8 Certificate of South Africa SABS IEC 60950 Conformity UL 60950-1: 2003 UL certificate FCC Part 15 Class B FCC ID grant Energy Star registration CSA C22.2 No 60950 CSA certificate Canada Statement on ICES-003 issue 3 label Mexico NOM-019-SCFI-1994 certificate Korean Safety Control law IEC 60950...
Page 112: Emc Requirements
10.2 EMC Requirements Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result must be submitted again prior to PVT samples delivery, which also has to meet Philips' immunity testing specification. 10.3 RoHS Restriction on the use of certain hazardous substances.
Page 113 4. When the HV circuitry is operating properly there is no possibility of an x- tube must be the same type as the original, including suffix letter, or a Philips radiation problem. High voltage should always be kept at the manufacturer's approved type.

Philips 170V8FB Service Manual

Service Service Service

89 17. General Product Specification

Quick Links

Chapters

Related Manuals for Philips 170V8FB

Summary of Contents for Philips 170V8FB

Table of Contents