Philips LTC 2600 Series Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Multiplexer
  5. LTC 2600 Series
  6. Instructions for use manual

Philips LTC 2600 Series Instructions For Use Manual

Video multiplexers
Hide thumbs Also See for LTC 2600 Series:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual
LTC 2600 Series
Video Multiplexers

Advertisement

Table of Contents
loading

Related Manuals for Philips LTC 2600 Series

Summary of Contents for Philips LTC 2600 Series

  • Page 1 LTC 2600 Series Video Multiplexers...

  • Page 3: Section Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to.

  • Page 4: Safety Precautions

    SAFETY PRECAUTIONS Caution: To reduce the risk of electrical shock, do not open covers. No user serviceable parts inside. Refer servicing to qualified service personnel This label may appear on the bottom of the unit due to space limitations. The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...

  • Page 5: Precauciones De Seguridad

    SICHERHEITSVORKEHRUNGEN VORSICHT: Um einen elektrischen schlag zu vermeiden, abdeckung nicht entfernen. Wartungen aller art qualifiziertem personal überlassen. Aus Platzgründen kann diese Warnung auf der Unterseite des Gerätes angebracht sein. Das Blitzsymbol im gleichseitigen Dreieck soll den Benutzer auf nicht isolierte “Hochspannung” im Gehäuse aufmerksam machen, die eventuell stark genug ist, um einen elektrischen Schlag zu verursachen.

  • Page 6: Table Of Contents

    Safety Precautions ..............4 Section 1: introduction to the ltc 2600 series video multiplexer ..7 1.1 Unpacking .

  • Page 7: Section 1: Introduction To The Ltc 2600 Series Video Multiplexer

    The shipping carton is the safest container in which the unit may be transported. Save it for possible future use. 1.2 Service If the unit ever needs repair service, the customer should contact the nearest Philips Communication & Security Systems Service Center for return authorization and shipping instructions.
  • Page 8 LTC 2600 Series Power Model 6 Channel Standard Color Models LTC 2622/50 LTC 2622/60 9 Channel Standard Monochrome Models LTC 2631/50 LTC 2631/60 LTC 2632/50 LTC 2632/60 Standard Color Models LTC 2641/50 LTC 2641/60 LTC 2642/50 LTC 2642/60 System4 Color Models...

  • Page 9: Section 2: Installing The Video Multiplexer

    LTC 2600 Series SECTION 2: INSTALLING THE VIDEO MULTIPLEXER 2.1 Mounting The multiplexer is supplied as a desktop unit. If desired the unit may be rack mounted using the included rack mount kit. 2.2 Connecting the Video Multiplexer System 1. Refer to Figures 2A and 2B for details on the input/output connections supplied by the multiplexer.
  • Page 10 Limited Distance Need S-VHS VCR and S-VHS Tape ** When using Remote Keyboard LTC 2601/00 or LTC 2602/00, to control Philips VCRs, please use the following connections. From Console Port of System4 to RS-232 Port of Philips VCRs Function 9 Pin D sub or purchase a S1383 cable.

  • Page 11: Programming

    2.3 Programming 1. When all connections have been successfully completed, apply power to the system. 2. Upon power up, the multiplexer will be using the factory-set default parameters. (See Appendix C for a complete listing of the Factory Default Settings.) 3.
  • Page 12 Indicators Indication POWER Power supplied to unit Primary indication: Alternate functions (Flashing): Camera- to cameo mode (ALT + SELECT) RECORD Record mode enabled PLAYBACK Playback mode enabled VCR Test VCR Test enabled MON B Monitor B enabled (Front panel keys control monitor B display) Sequence mode enabled CAMEO...
  • Page 13 LTC 2600 Series 4. The multiplexer is programmed through on-screen menus which include access to on-screen HELP information. The menus will be displayed on Monitor A in the system. 5. To access the menu screens, press the ALT key 6. The Main Menu (as shown below) displays two setup options: Quick Setup and Advanced Setup.
  • Page 14 8. Select Time/Date from the Quick Setup menu. Enter the time format (12 or 24 hours), time, date format (dd/mm/yyyy; mm/dd/yyyy; yyyy/mm/dd) and date information as requested. Use the direction (arrow) keys to move the cursor and to scroll through parameter settings. Use the SELECT key you want to program and to save your selections.
  • Page 15 Standard Model Display. NOTE: The LTC 2600 Series multiplexers are configured to record and playback from a wide range of VCRs. The VCR provides a pulse (VEXT) each time a video field is recorded to tape. This signal lets the multiplexer know that it can switch to a new camera.
  • Page 16 LTC 2600 (Includes TC82XXC Series) Note: For information regarding quick function keys enabling “instant access” to the programming lists on the LTC 2600 Video Multiplexer, please refer to Appendix E at the back of this book. SELECT VCR *VCR OUT* SETUP 1 >TYPE:PHILIPS TC3991 HD...

  • Page 17: Live (Display)

    SECTION 3: OPERATING THE LTC 2600 SERIES VIDEO 3.1 Guide to Multiplexer Operation Operating the LTC 2600 Series Video Multiplexer requires a general knowledge of basic and combined operating modes as described in this section. Basic operating modes are: LIVE (Display), RECORD, and PLAYBACK. Duplex multiplexer models provide combinations of the basic modes (e.g.

  • Page 18: Record

    LTC 2600 Series Zoom : Enables the active camera display (a cameo in multi or quad display) to be digitally enlarged by a factor of 2:1. "Zoom" will be displayed on the monitor screen. Selecting any other camera (using the camera keys) will display that camera image in full screen enlarged mode.

  • Page 19: Combined Modes

    , then 2, then PLAY. 3.6 Security Lockout The LTC 2600 Series Multiplexer provides three levels of access to operation: (1_ Full Access, (2) Limited Access, and (3) Lockout (i.e. No access/no front panel manipulation possible). The key commands controlling this feature are:...

  • Page 20: Section 4: Advanced Programming & Operation

    LTC 2600 Series SECTION 4: ADVANCED PROGRAMMING & OPERATION 4.1 Guide to Advanced Functions The following information is provided for advanced multiplexer system and customized system configurations. This information is not necessary for typical, day-to-day operations of the multiplexer (see Sections 2 and 3).

  • Page 21: Action Setup

    4.3 Action Setup The LTC 2600 Series multiplexer includes a Digital Motion Detection feature that detects movement within the camera scene. When this feature is programmed and motion is detected, the record/display rates will increase. Using the ACTION LIST facility, the priority of recording can be changed to include recording of camera pictures and at the same time prioritize picture display on the monitor.
  • Page 22 ACT • Audible Alarm: The LTC 2600 Series provides an Audible alarm. Enable: When an action occurs, the beeper will sound for the duration of the action. Press any key to turn the beeper Off.

  • Page 23: Alarm Setup

    Recording of non-alarmed cameras cannot take place while alarms are present. To only record alarms, set up desired Alarm Recording configuration as described above (Alarm List, Alarm Recording) and enable the VCR Output Relay to activate the VCR (LTC 2600 Series must be in the Recording mode.) •...

  • Page 24: Configure Setups

    4.7 Configure Setups The LTC 2600 Series multiplexer has the capability to provide up to six individually configured setups that are retained in the multiplexer memory. By using these setups, the multiplexer can be programmed to automatically change its mode of operation based on a timer setting. This allows different configurations to be used (e.g. day, night, weekend and holidays).The timer provides seven days of programming with six individual programmable...

  • Page 25: Video Loss

    If changes are made, you always have the option of returning to the default settings by selecting the DEFAULT SETTINGS command in the Advanced Setup menu. 4.11 Languages To simplify the setup process, the menus of the LTC 2600 Series can be displayed in any one of six different languages.These are: English...

  • Page 26: Section 5: System4 Model Functions

    • CCL command for programming and controlling the multiplexer. • When connected to selected Philips CSS VCRs, LTC 2601/00 or LTC 2602/00 keyboard will control primary VCR functions (Record, Play, Stop, Fast Forward, Rewind). • When a printer is connected, a copy of the logged events can be printed.

  • Page 27: Log

    The LTC 2601/00 and LTC 2602/00 are full function keyboards designed for system control, programming, and Pan/Tilt/Zoom (Philips Allegiant R/D or AutoDome) operation with the LTC 2600 Series System4 Model multiplexers. By using the keyboard port expander LTC 2604 Series unit, purchased separately, up to four keyboards may be connected.

  • Page 28: Keyboard Operation

    LTC 2600 Series 5.8 Keyboard Operation Numeric Display The numeric display is a three-digit display that shows the number of the multiplexer that the keyboard is currently controlling.There are two modes for this display. 1. The first mode displays the multiplexer number (default mode).
  • Page 29 AUX+ - Press AUX+ to select a receiver/driver auxiliary function at the camera location. AUX- - Press AUX- to deselect any receiver/driver auxiliary functions currently in the 'ON' state. (Note: Refer to Philips R/D or AutoDome Instruction Manual for Auxiliary function) MultiKey Access Functions Simultaneously Press QUAD + CAMEO + Allplex: Set the keyboard user level to NO ACCESS.

  • Page 30: Appendix A

    Bi-Phase Output (15 Pin D) ** Not available. Color Color Color 18 Steps 18 Steps Yes (2) Table A1: LTC 2600 Series Model Features Appendix A Color Color Color 32 Steps 32 Steps 32 Steps 32 Steps Color Yes (2)

  • Page 31: Appendix B: Special Applications

    LTC 2600 Series APPENDIX B: SPECIAL APPLICATIONS Spot Monitor Philips Figure B1: Record Plus Multiscreen Display Spot Monitor P h ilip s Figure B2: Simultaneous Record Plus Playback Video Video Main Monitor Philips Up to 16 cameras MON B MON A...
  • Page 32 LTC 2600 Series AutoDome Au toDom e Data Figure B3: Simultaneous Record to Two VCRs AutoDome Au toDom e V id eo Data AL L PL EX - - - Figure B4: Mon B Can Display Multiscreen When Operating in Live or Playback Mode...
  • Page 33 LTC 2600 Series AutoDome Au toDom e Data P hilip s AL L PL EX - - - Figure B5: LTC 2672, LTC 2681, and LTC 2682 Series with LTC 2650 GUI AutoDome AutoDome Video Philips Philips Data Keyboard Terminated...
  • Page 34 LTC 2600 Series V ideo V ideo Up to 16 cameras Philip s Philip s M ON B M ON A V C R V C R O U T A L A R M 3032724-702 Connected to " V CR Out"...

  • Page 35: Appendix C: Factory Default Settings

    LTC 2600 Series APPENDIX C: FACTORY DEFAULT SETTINGS ITEM DEFAULT DATE/TIME: Date 01/01/1998 Time 12/00/00 Time Format 24 H Date Format dd/mm/yy (PAL) mm/dd/yy (NTSC) VCR SETUP: Time Lapse 3 Hr (PAL) 2 Hr (NTSC) Record List 01-16, 01-16. Playback Format...
  • Page 36 LTC 2600 Series ITEM DEFAULT CAMERA TITLE: Camera Title CAMERA 1 SEQUENCES: Seq dwell full A 5 sec Seq dwell quad A 5 sec Seq dwell full B 5 sec Seq dwell quad B 5 sec Mon A full 1-16, 1-16...
  • Page 37 LTC 2600 Series ITEM DEFAULT CONFIGURE DISPLAY: Time/Date mon A Time/Date mon B Show Text mon A Show Text mon B Text White:Black Cameo borders BLACK Menu Timeout Gain Control AUTO VIDEOLOSS: Vid Loss o/p ENABLE Vid Loss Relay Video Loss List...

  • Page 38: Appendix D: Programming Reference

    LTC 2600 Series APPENDIX D: PROGRAMMING REFERENCE Menu Trees: Advanced Setup The following menu trees are provided for reference in locating advanced programming functions. Descriptions of all these functions are located in Section 4. (The Quick Setup menus are described and shown in complete detail in Section...
  • Page 39 LTC 2600 Series Menu Trees: Advanced Setup (continued) MAIN MENU 1.0.0 SETUP 1 QUICK SETUP >ADVANCED SETUP Choose: SELECT More Exit: ZOOM * System4 only. † LTC 2622 only. ADVANCED SETUP SETUP 1 TIME/DATE AUTOSET VCR SETUP ACTION SETUP ALARM SETUP...
  • Page 40 LTC 2600 Series Menu Trees: Advanced Setup (continued) MAIN MENU 1.0.0 SETUP 1 QUICK SETUP >ADVANCED SETUP Choose: SELECT More Exit: ZOOM * System4 only. ADVANCED SETUP SETUP 1 TIME/DATE AUTOSET VCR SETUP ACTION SETUP ALARM SETUP CAMERA TITLES SEQUENCES...
  • Page 41 RECORD LIST VCR OUT Choose: SELECT More Exit: ZOOM SELECT VCR *VCR OUT* SETUP 1 TYPE PHILIPS TC3990A EDIT CUSTOM VCR Choose: SELECT More Exit: ZOOM RECORD LIST *VCR OUT* SETUP 1 CAMERA 1 01 02 03 04 05 06 07 08...
  • Page 42 Menu Trees: Advanced Setup - ACTION SETUP ACTION SETUP SETUP 1 ACTION DWELL ACTION LIST ACTION ZONES WALKTHROUGH MANUAL RESET CAMERA HISTORY BEEPER Choose: SELECT Edit: * System4 only. 05 sec ACTION LIST SETUP 1 -- -- -- -- -- -- -- -- ENABLE -- -- -- -- -- -- -- -- Use camera keys to...
  • Page 43 LTC 2600 Series Menu Trees: Advanced Setup - ALARM SETUP ALARM SETUP SETUP 1 ALARM DWELL ALARM LIST ALARM INPUTS MANUAL RESET CAMERA HISTORY BEEPER Choose: SELECT Edit: * System4 only. 05 sec ALARM LIST SETUP 1 ENABLE -- -- -- -- -- -- -- --...
  • Page 44 Menu Trees: Advanced Setup - CONFIGURE SETUPS CONFIGURE SETUPS LOAD SETUP COPY SETUP SETUP TITLE TIME EVENTS Choose: SELECT More Exit: ZOOM LOAD SETUP SETUP 1 SETUP 2 SETUP 3 SETUP 4 SETUP 5 SETUP 6 Choose: SELECT More Exit: ZOOM COPY FROM Copy a memory setup (1-6) to a different...

  • Page 45: Appendix E: Quick Function Keys

    LTC 2600 Series APPENDIX E: QUICK FUNCTION KEYS The LTC 2600 Series Video Multiplexer provides quick function keys which enable “instant access” to the programming lists critical for multiplexer operation.To access the list commands, you will have to press a sequence of keys.
  • Page 46 3935 890 07114 99-05 © 1999 Philips Electronics N.V. Printed In U.S.A. © 1999 Philips Communication & Security Systems Inc. All Rights Reserved. Philips ® is a registered trademark of Philips Electronics N.V. Data subject to change without notice...

This manual is also suitable for:

Ltc 2622/50Ltc 2632/50Ltc 2631/50Ltc 2622/60Ltc 2631/60Ltc 2632/60 ... Show all

Table of Contents