Table of Contents
Advertisement
LTC 2600 Series
SECTION 4: ADVANCED PROGRAMMING & OPERATION
4.1 Guide to Advanced Functions
The following information is provided for advanced multiplexer system and customized system configurations. This
information is not necessary for typical, day-to-day operations of the multiplexer (see Sections 2 and 3).
Information is also provided in this section for changing factory-set default parameters (e.g. camera titles, display
configuration, etc.) to suit your specific recording/display needs. These advanced functions are accessed through the
Advanced Setup menu which is shown below. A complete listing of menu selections for Advanced Setup is included
in Appendix D.
NOTE: Additional Advanced Setup menu selections are offered for System4 models. These include: PC
PRINTER, LOG, PASSWORD, and EXPAND SYSTEM. These functions are explained in Section 5 which contains
information that pertains only to System4 multiplexer models. This section also includes special programming
information for the Sequencing function.
NOTE: Since Time/Date, Autoset, and VCR Setup are covered in Section 2 as part of Quick Setup, this chapter
describes only the remaining advanced functions.
4.2 VCR Output (From the VCR Setup Menu)
The VCR OUTPUT relay controls external devices such as changing the recording speed when an action and/or
alarm occurs. The VCR output relay will remain active while there are active alarms or action. The following
functions can be programmed:
•
Output: The output relay can be activated on an action, alarm, action and alarm or off, enabling the installer to
prioritize the recording of camera pictures.
•
Output relay: The output relay can be set to operate as normally closed or normally open contacts.
•
Alarm speed: The VCR recording speed can be set to match the alarm recording speed of the VCR for an
action/alarm input, ensuring that no part of any incident is missed.
Note that the System4 Duplex units provide two VCR output relays.
ADVANCED SETUP
SETUP 1
>TIME/DATE
AUTOSET
VCR SETUP
ACTION SETUP
ALARM SETUP
CAMERA TITLES
SEQUENCES
CONFIGURE SETUP
CONFIGURE DISPLAY
VIDEOLOSS
DEFAULT SETTINGS
LANGUAGE
Choose:SELECT
More:V
Exit:ZOOM
20
Section 4 Advanced Programming
Hide quick links:
Advertisement
Table of Contents
