12 V vehicles from heavy to light duty. The CAPS uses a capacitor to provide the power needed for the jumpstart. This allows the unit to store a lot of energy, charge rapidly, and provide the necessary energy to the vehicle being started.
1. Connect the positive and negative clamps to the vehicle battery, observe polarity. (Keep clamps clean and in good condition.) 2. Press and release the CAPS button, the light should turn green and the buzzer should sound, indicating the unit is armed and ready.
To Charge the CAPS: From Outlet: Plug the charger into an AC outlet and connect the charger to CAPS. Once CAPS is charged, the light will be a slow-flashing green. Leave unit connected to AC outlet to maintain charge.
(CAPS will Charge CAPS. not enter jumpstart mode.) Allow CAPS to charge for Flashing Vehicle is charging CAPS several minutes. Press button Yellow and capacitor and internal battery. before disconnecting from Buzzing vehicle. P: 479.419.4800 │ F: 479.419.4801 │ www.purkeys.net...
Leads are “live” before pressing Disconnect leads at the quick button. After pressing button, An internal mag disconnect and contact with leads not connected, light is switch is shorted. Purkeys Customer Service. green and buzzer sounds. P: 479.419.4800 │ F: 479.419.4801 │ www.purkeys.net...
1. Connect positive and negative clamps to vehicle, observe polarity. 2. Press and release the CAPS button, the light should turn green and the buzzer should sound. If the light flashes, refer to the light indications guide on page 10.
Unit is armed and ready Reverse polarity or clamps not connected or clamps shorted Capacitor is charging Internal battery is too low to function Internal CAPS battery is charging, press button before disconnecting from vehicle P: 479.419.4800 │ F: 479.419.4801 │ www.purkeys.net...
CAPS USER GUIDE PARTS LIST Refer to CAPS Internal Diagram on page 6 for details. Description Part Number Quantity CAPS PJM-100 Cable Assembly CA00126 Charger CHRG-010 Internal Battery PC925 5 amp ATC fuses F00005 10 amp ATC fuses F00007 User Guide INST048 P: 479.419.4800 │...
Purkeys. This warranty shall not apply if any Purkeys product is used for a purpose for which it is not designed or is in any way altered without the specific prior written consent of Purkeys.
Page 14
Product as Purkeys deems most appropriate in its sole discretion. Purkeys neither assumes nor authorizes any other person to assume on its behalf any other warranty or liabilities in connection with Purkeys products. The Warranty does not apply to fuses or other “consumable”...
Need help?
Do you have a question about the CAPS and is the answer not in the manual?
Questions and answers