Inserting Batteries In The Remote Control Handset; Instructions For Batteries; Front Panel And Peripheral; Connect Peripheral Equipment - Superior SP 5522 TV/DVD User Manual

REMoTE coNTRoL BUTToNS / FRoNT PANEL AND
PERIPhERAL / coNNEcT PERIPhERAL EqUIPMENT
Remark that to be able to use TV functions by using
remote controller first of all press TV button on the
remote controller.

Inserting batteries in the remote control handset

• Place the batteries in the right directions as seen
below.
• Remove the battery cover located on the back of
the handset by gently pulling upwards from the
indicated part.
• Insert two MN2400 AAA or equivalent type
batteries inside.
• Replace the battery cover.

Instructions for batteries

• Use only batteries of the recommended or an equi-
valent type!
• Do not mix different battery types or new and used
batteries!
• When inserting the batteries, follow the polarity
markings!
• Remove the batteries whenever the article is not in
use for a prolonged period of time!
• Remove empty batteries from the article!
• Do not attempt to recharge disposal batteries!
• Rechargeable batteries must be charged under
adult supervision!
• Do not short-circuit the battery terminals!
• Do not throw batteries into the fire!

FRoNT PANEL AND PERIPhERAL

coNNEcT PERIPhERAL EqUIPMENT

via the Euroconnector

• Your TV set has two Euroconnector sockets. If you
want to connect peripherals (e.g. video, decoder,
etc.) which have Euroconnectors, to your TV, use
SCART1 or SCART2 inputs.
• If an external device is connected via Euroconnector
sockets TV is switched to AV mode automatically.

via Ant Input

• If you want to connect to your TV, peripherals like
video recorders or decoders, but the device you
want to connect does not have Euroconnector, you
should connect it to the ANT input of your TV set.
If the vcR is connected via antenna input it is
suggested to use the Programme 0.

Tv and video Recorder

• Connect the aerial cables.
• Better picture quality can be obtained if you also
connect a eurocable to AV / SCART socket.

Playback NTSc

• Connect NTSC VCR player to AV / SCART of the
TV.
• Then, press "AV" button to select AV-1 or AV-2 or
AV.

copy Facility

Source selection for VCR recording.
• Select Features Menu in the Main Menu.
• Select AV-2 OUTPUT source pressing "F" or
"E" button.
45
GB