Advertisement
Nursery Swing
MODEL NUMBER S001070
SAFETY, INSTALLATION AND USER MANUAL.
WARNING
1. Safety Straps must always be fastened when infant is seated in the nursery swing.
2. The seat should only be used with the frame. Do not use it in other equipment
or as a stand alone product.
3. Do not attach additional load to the child carrier.
4. Do not modify the equipment.
5. Do not use the equipment if any part is broken.
6. Adult supervision is required at all times. This item should be assembled by an adult.
For more information on Sportslife products, visit our website www.sportslife.net.au
Sportslife Parts & Service Enquiries: 1800 465 070 or email: service@actionspares.com.au
Action Sports Equipment Pty Ltd 72 Silverwater Rd, Silverwater NSW Australia 2128
Advertisement
Table of Contents
Summary of Contents for Sportslife S001070
- Page 1 6. Adult supervision is required at all times. This item should be assembled by an adult. For more information on Sportslife products, visit our website www.sportslife.net.au Sportslife Parts & Service Enquiries: 1800 465 070 or email: service@actionspares.com.au Action Sports Equipment Pty Ltd 72 Silverwater Rd, Silverwater NSW Australia 2128...
- Page 2 SAFETY NOTES To prevent damage and accidents to persons and/or property, the following instructions and advice must be followed: Please retain complete instructions for future reference. Thoroughly read all parts of this manual and strictly follow the instructions before using. Do not use any accessories other than those provided and /or specified by the manufacturer.
- Page 3 Assembly Instructions PARTS LIST Use the below Parts List to make sure all parts are present before the assembly of the equipment. Contact Customer Service at 1800 465 070 if any parts are missing. Description Illustration Part No. M6 40mm bolt M6 60mm bolt U screw M6 washer...
- Page 4 Assembly Steps step 1 step 2 step 2 step 3 step 3 Step 1 Assembling Leg and Top Bar 1.-1 Fix the top bar (part I) and top leg (part J and K) together using bolt set (bolt Bx 1 + washer Dx 1 + spring washer Ex 1 + domenut Fx 1) Step 2 Complete Side Bar Assembly 2.-1 Assemble top leg, bottom leg and side bar (part L) all together...
- Page 5 Step 4 Assembling The Ground Anchors Fix ground anchor Q into the bottom hole of each leg and make sure that the anchor is well 4.-1 installed to prevent overturning or lifting of the support elements during normal or foreseeable misuse. 4.-2 While selecting a place to install the equipment, take into account the space requirement for swinging.
Need help?
Do you have a question about the S001070 and is the answer not in the manual?
Questions and answers