G E T T I N G S T A R T E D
Base Key Fob
Locking And Unlocking The Doors
Push and release the lock button on the key fob
to lock all doors. The turn signal lights will flash,
and the horn will chirp to acknowledge the
signal.
Push and release the unlock button on the key
fob once to unlock the driver's door or twice
within five seconds to unlock all doors. The turn
signal lights will flash to acknowledge the un-
lock signal. The illuminated entry system will
also turn on.
1st Press Of Key Fob Unlocks
This feature lets you program the system to
unlock either the driver's door or all doors on
the first push of the unlock button on the key
fob. To change the current setting, refer to your
"Uconnect Settings" in "Understanding Your
Instrument Panel" in the Owner's Manual on
www.chrysler.com/en/owners/manuals for fur-
ther information.
Opening The Trunk
Push the trunk release button on the key fob two times within five seconds to open the trunk.
Panic Alarm
1. Push the PANIC button once to turn the panic alarm on.
2. Wait approximately three seconds and push the button a second time to turn the panic alarm
off.
12
Base Key Fob
1 — Trunk
3 — Lock
2 — Unlock
4 — Remote
Start — If
Equipped
5 — Panic
Alarm
6 — Emer-
gency Key