Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Flight Manuals
  4. Toy
  5. Katana-46
  6. Assembly manual

Flight Katana-46 Assembly Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Wing span:55.1in/1400mm; Weight:2250-2400g;
Wing area:36sq.dm;
Length:51.5in/1310mm;
CAUTION : this plane is not a toy!
Before use , please carefully read this manual.
●First-time builders should seek advice from people having building
experience in order to assemble the model correctly and to produce its
performance to full extent .
●Assemble this kit only in places out of children's reach!
●Take enough safety percautions prior to operating this model.
You are responsible for this model's assembly and safe operation!
●Always keep this instruction manual ready at hand for quick
reference,even after completing the assembly.
Engine:2cycle 40-46;
Radio:4channels 5servos;
Glow & electric RC model;
P.1

Advertisement

loading

Summary of Contents for Flight Katana-46

  • Page 1 Wing span:55.1in/1400mm; Weight:2250-2400g; Wing area:36sq.dm; Engine:2cycle 40-46; Radio:4channels 5servos; Length:51.5in/1310mm; Glow & electric RC model; CAUTION : this plane is not a toy! Before use , please carefully read this manual. ●First-time builders should seek advice from people having building experience in order to assemble the model correctly and to produce its performance to full extent .
  • Page 2 MAIN WINGS AND AILERON SERVO Gather the stablizers, aluminium joiner and other parts together. Connect the aileron and the main wing by hinges. Be sure to apply instant type glue to both sides of each hinges. Cut away covering film for the servo.
  • Page 3 Put the servo into the hole and pull out the servo extension from main wing. Drill hole for the servo and fix it with TP screws. Measure the right position of the tri-horn on the aileron, and drill holes for the screws.
  • Page 4 Fix up the tri-horns to the aileron by screws Link the servo and tri-horns with pushrod and straper. Finished photo for the main wing aileron servo installation.
  • Page 5 Find out the holes on each sides of the fuselage as shown. The carbon joiner as shown. Connect the main wings and the fuselage with joiner. Plastic Use two 5mm screws of each bolt sides to ensure the wings fixed upto the fuselage.
  • Page 6 Finished photo for the main wing installation. ELEVATOR AND RUDDER Measure the right position and remove the film from the stabilizer. Connect the aileron and the stabilizer by hings, and glue them.
  • Page 7 Glue the stablilizer to the fuselage. Measure the right position and remove the cover. Apply install glue between fuselage and vertical fin.

  • Page 8: Tail Wheel

    TAIL WHEEL Insert the tail wheel landing gear into the rudder. Apply instant type glue to both sides of each hinges of the rudder. Screw four TP screws to fix up the tail wheel on the tail of the fuselage.

  • Page 9: Main Landing Gear

    Link the rudder servo to the rudder with pushrod. Link the elevator servo to the elevator with pushrod. MAIN LANDING GEAR Gather the landing gear, main wheels ,wheel covers, and other parts.
  • Page 10 Install the wheel cover, and fix it up to landing gear with TP screw. Fixup the landing gear strut to fuselage with 3 bolts. ENGINE AND MOTOR Glue the throttle sevor board as shown. P.10...
  • Page 11 Install the throttle servo and the throttle rod as shown. Install the fuel tank into the fuselage, and fixup it with belt. Use the ruler to measure the length from firewall to airscrew, which should be 118 MM. P.11...
  • Page 12 Install the engine mount on both sides with four 3mm screws. separate part for the motor installation. Install the motor with the separate part provided. canopy and cowling Fixup the canopy with TP screw on each side of the canopy. P.12...
  • Page 13 Install the cowling with four TP screws. The other way to install the elevator servo and rudder servo. Install servo as shown. The header servo methrod adopt for electric play. Install the elevator and rudder servo into fuselage as shown. P.13...
  • Page 14 Link the elevator servo to the elevator with pushrod. Use the same method to link the rudder servo to rudder. P.14...
  • Page 15 ADJUSTMENT P.15...
  • Page 16 Control throws & CG Position 60MM 60MM 81MM 81MM 50MM 50MM 110mm(4.33in) 110MM 4.33in P.16...