Table of Contents
Advertisement
Model No.: WR254
Physical Details
Front-mounted LEDs
Power LED
On - Power on.
Off - No power.
Internet LED
On - Connection to the Broadband Modem attached to the WAN (Inter-
net) port is established.
Off - No connection to the Broadband Modem.
Flashing - Data is being transmitted or received via the WAN port.
WLAN LED
On - Wireless connection available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. Data includes "network traffic" as well as user data.
LAN LEDs
For each port, there are 2 LEDs
•
Link/Act
•
•
•
•
100
•
•
Figure 1: Front Panel
On - Corresponding LAN (hub) port is active.
Off - No active connection on the corresponding LAN (hub)
port.
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
On - Corresponding LAN (hub) port is using 100BaseT.
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
Introduction
5
Advertisement
Table of Contents
